Ruckus Zone Director questions

[trevdance]

Hi all,

 

This is my first post so please bear with me.

 

I've recently setup a ruckus zone director and one AP in a small network environment.

 

My questions is this, we have for 3 different SSID's for this company and I have been asked to allow a certain IP address range to one SSID & another IP address range to another SSID and then finally all IP addresses not in range one or two to access the third SSID.

 

I am struggling of how to do this or even if it is possible?

 

Each IP address range will contain 20 IP address of various machines, tablets and iOS devices.

 

Any help would be great thanks.

[snagrat]

Are your devices fixed IP or are you expecting the device to get a different IP from DHCP depending on which SSID they are connected to?

[snagrat]

Although not sure that matters but you may need to look at VLANs

 

For the access you need to look at using L3 ACL which can be found in Configure -> Access Control.

[trevdance]

The devices on the first 2 SSID's are fixed IP. On the 3rd SSID, this needs to accept any IP not in the first two address ranges. Thanks

[trevdance]

I can't see how to use internal IP addresses to block using L3 ACL?