Grommit Posted September 1, 2007 Posted September 1, 2007 I have built a PC with a 160gb HDD I then used Partition Magic to make the C: drive 20 GB and deleted the D: drive.. When I try to Ghostgast this onto a 80GB Laptop it says it's gonna take 132 hours? (only i ghost option 152 GB disk) (and its on the same gig switch) I then try to Local Partition to Image for the C: to Image to the D: ( reactivated D:) but it won't highlight the C; patition as the source.. Any ideas on the best way forward
Messa Posted September 1, 2007 Posted September 1, 2007 If your using a Ghost Task or Ghost Cast to pull the image you will need to change the settings because when you partition a hard drive you need to set in the task that its DISK1 but also PARTITION1(C:) or it will do the whole drive and the both partitions (C:) and (D:).
Grommit Posted September 2, 2007 Author Posted September 2, 2007 If your using a Ghost Task or Ghost Cast to pull the image you will need to change the settings because when you partition a hard drive you need to set in the task that its DISK1 but also PARTITION1(C:) or it will do the whole drive and the both partitions (C:) and (D:). Do i do this after I have booted to Ghost but just before I start the Ghosting ?
Messa Posted September 2, 2007 Posted September 2, 2007 You do this when your setting up the task which is before.
Grommit Posted September 2, 2007 Author Posted September 2, 2007 My next problem is that the up and down arrows keep freezing... it's a Siemmens Fujitsu PC with a USB keyboards (no ps2) .. How can I over ride this ?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now