# --- Session Options
#
# Note:                     # is a number equal to or greater than 0
#
# SESSION_#_TITLE           Title description for SESSION. Needed for replimenu.
# SESSION_#_TYPE            Package type, choose beetwen:
#                           - vncviewer        Start vncviewer in X
#                           - rdesktop         Start rdesktop in X
#                           - x                Start x-terminal session (xdm)
#                           - ssh              Start ssh client in linux console
#                           - telnet           Start telnet client in linux console
#                           - ica              Start Citrix ICA client in X
#                           - tn5250           Start AS400 client in linux console
# SESSION_#_SCREEN          Display number to run the X server on
# SESSION_#_AUTOSTART       ON      Application will be executed immediately at startup
#                           OFF     Application will appear in a menu to be started manually
# SESSION_#_WORKSPACE       Workspace to run program on in a window manager
# SESSION_#_type_SERVER     IP address/hostname of the server
# SESSION_#_type_OPTIONS    Command line options for the session type


# Individual Session Settings, override defaults
#
# IMPORTANT:  Make sure you minimum have a SESSION_0. Otherwise you will get an error 
# on boot. You may have additional sessions: SESSION_1, SESSION_2 ...
# SESSION_0 is on ctrl-alt-F3
# SESSION_1 is on ctrl-alt-F4
# ... etc.


# If you only have one session, it is a good idea to uncomment this line:
#AUTOSTART=On

# Typical Windows 2000 session 
#SESSION_0_TITLE="Windows 2000 terminal server"
#SESSION_0_TYPE=rdesktop
#SESSION_0_RDESKTOP_SERVER=192.168.1.1
#SESSION_0_RDESKTOP_OPTIONS="-u 'fred'"

# Typical Windows 2003 Server session, with True-color and sound redirection
# Note: use '-a 16' and '-a 24' to get true-color with Windows 2003+
# Older servers don't support these color depths, wrong settings may cause connection to fail.
SESSION_0_TITLE="Windows 2003 terminal server (16 bit color depth)"
SESSION_0_TYPE=rdesktop
SESSION_0_RDESKTOP_SERVER=10.10.10.1
SESSION_0_RDESKTOP_OPTIONS="-u user -p password -a 16 –r sound"

#SESSION_2_TITLE="Citrix server"
#SESSION_2_TYPE=ica
#SESSION_2_ICA_APPLICATION_SET="Microsoft Word"
#SESSION_2_ICA_OPTIONS="-username donald -password qwak"

# ICA: Instead of connecting to an "application set",
# you can directly connect to a specific server desktop
#SESSION_3_TITLE="Citrix server"
#SESSION_3_TYPE=ica
#SESSION_3_ICA_SERVER=ICA

#SESSION_#_TITLE="Unix server"
#SESSION_#_TYPE=x
#SESSION_#_X_SERVER=192.168.1.2
# Default is '-query'
##SESSION_#_X_OPTIONS="-indirect"
# You should set also "SCREEN_X_FONT_SERVER", below

#SESSION_#_TITLE="VNC server"
#SESSION_#_TYPE=vncviewer
#SESSION_#_VNCVIEWER_SERVER=192.168.1.2

#SESSION_#_TITLE="Telnet server"
#SESSION_#_TYPE=telnet
#SESSION_#_TELNET_SERVER=192.168.1.2

#SESSION_#_TITLE="SSH server"
#SESSION_#_TYPE=ssh
#SESSION_#_SSH_SERVER=192.168.1.2

#SESSION_#_TITLE="AS400 server"
#SESSION_#_TYPE=tn5250
#SESSION_#_TN5250_SERVER=192.168.1.2
# Use this option to specify keyboard map
#SESSION_#_TN5250_OPTIONS="map=280"


# --- General Options
#
# AUDIO_LEVEL        Audio Level for sound, 0-100
# KEYBOARD_MAP       Keyboard layout
# TIME_ZONE          Used to set time zone on TS client by entering the UTC offset.
#                    This can be set automatically if the appropriate dhcpc option is selected
#                    (Option 2, time offset in seconds)
# RECONNECT_PROMPT   This displays the reconnection/shutdown options for when a session is ended
#
#                    OFF    No reconnect prompt
#                    ON     Reconnect prompt will be displayed
#                    MENU   Shows a menu with a shutdown and reconnection option
#                    MENUXX As MENU option, but the XX is a time period in minutes.
#                           After XX minutes shutdown will occur unless the reconnect option
#                           is choosen

AUDIO_LEVEL=67

# Look inside BuildFiles\build.conf* file for a list of the supported KB layouts
KEYBOARD_MAP=en_us
#TIME_ZONE="UTC-12:30"
RECONNECT_PROMPT=On


# --- X Server Options
#
# SCREEN_RESOLUTION       Screen resolutions available in the workstations
# SCREEN_COLOR_DEPTH      Number of bits per pixel (8,16,24)
# SCREEN_HORIZSYNC        Monitor horizontal sync frequency in Khz.
#                         If left blank Xorg will try to detect with DDC
# SCREEN_VERTREFRESH      Monitor vertical refresh frecuency in Hz.
#                         If left blank Xorg will try to detect with DDC
# SCREEN_X_FONT_SERVER    IP address or hostname of the font server for X
#                       
#                         Screen Saver Settings
# SCREEN_BLANK_TIME       Minutes to X session goes blank
# SCREEN_STANDBY_TIME     Minutes to X session goes into standby mode
# SCREEN_SUSPEND_TIME     Minutes to X session goes into suspend mode
# SCREEN_OFF_TIME         Minutes to X session turn off
#
# MOUSE_PROTOCOL          Mouse protocol type (Microsoft, PS/2, etc.)
#                         (mouse is autodetected, use this only if it fails)
# MOUSE_DEVICE            Mouse device:  /dev/ttyS0 -> COM1
#                                   /dev/ttyS1 -> COM2
#                                   /dev/ttyS2 -> COM3
#                                   /dev/ttyS3 -> COM4
#                                   /dev/psaux -> PS/2 mouse port
#                                   /dev/input/mice -> USB mouse (needs USB package)
# MOUSE_RESOLUTION        Mouse resolution
# X_NUMLOCK               Set numlock state on boot

#SCREEN_RESOLUTION="800x600"
SCREEN_RESOLUTION="1024x768"

SCREEN_COLOR_DEPTH="16"

SCREEN_HORIZSYNC="30-64"
SCREEN_VERTREFRESH="56-87"

#SCREEN_X_FONT_SERVER=192.168.1.2:7100

SCREEN_BLANK_TIME=10
SCREEN_STANDBY_TIME=20
SCREEN_SUSPEND_TIME=30
SCREEN_OFF_TIME=60

#MOUSE_PROTOCOL=PS/2
#MOUSE_DEVICE=/dev/psaux
MOUSE_RESOLUTION=100
#X_NUMLOCK=Off


# --- Citrix ICA Specific Options
#
#                       GLOBAL Settings
#ICA_USE_SERVER_KEYBOARD    Use default server keyboard, otherwise use KEYBOARD_MAP
#                           variable
#ICA_BROWSER_PROTOCOL       Broswer protocol, can be HTTPonTCP or UDP
#
#                           APPLICATION SET settings
#ICA_ENCRYPTION             Encryption level for ICA
#                           Valid Settings Below
#                           "Basic"
#                           "RC5 (128 bit - Login Only)"
#                           "RC5 (40 bit)"
#                           "RC5 (128 bit)"
#                           "RC5 (56 bit)"
#ICA_COMPRESS               Compression, On/Off
#ICA_AUDIO                  Audio, On/Off
#ICA_AUDIO_QUALITY          Audio Quality, Low, Medium, High
#ICA_PRINTER                This will turn on ICA autocreate printers, see printer section
#                           for details, On/Off
#
#                           NOTE: You must have the lpr package included for this option
#                           to work.
#
#ICA_APPLICATION_SET        Published Application (Not needed if using
#                           ICA_SERVER)
#ICA_SERVER                 Server to Connect to (Not needed if using
#                           ICA_APPLICATION_SET, but needed if the ICA-Masterbrowser
#                           is not on the local network.)
#ICA_WFCLIENT_type_specific This allows you to specify specific config file details for global ica
#                           parameters any parameter can be changed with this setting. An example of this is
#                           ICA_WFCLIENT_CLIENTDRIVE="On"
#                           See your application manual for documentation on the settings which
#                           can be used.

#ICA_USE_SERVER_KEYBOARD=Off
#ICA_BROWSER_PROTOCOL=HTTPonTCP
#ICA_SERVER=
#ICA_ENCRYPTION=Basic
#ICA_COMPRESS=On
#ICA_AUDIO=On
#ICA_AUDIO_QUALITY=Low
#ICA_PRINTER=Off
#ICA_SEAMLESS_WINDOW=Off


# --- Printing Options
#
# PRINTER_0_NAME     Workstation Printer Name, Can be Any Valid Name
#                    If you have turned ICA_PRINTER=ON then this is the 
#                    name of the printer driver
# PRINTER_0_DEVICE   Workstation printer device (if not specified devices
#                    are not loaded).
#                       /dev/printers/[0-2]   for parallel ports
#                       /dev/ttyS[0-3] for serial ports
#                       /dev/usb/lp[0-2] for USB printers
#
# PRINTER_0_TYPE     P for parallel, S for serial, U for USB printer
# PRINTER_0_OPTIONS  Serial port options.
# PRINTER_1_*        See PRINTER_0_*
# PRINTER_2_*        See PRINTER_0_*
# PRINTER_3_*        See PRINTER_0_*

#PRINTER_0_NAME="parallel"
#PRINTER_0_DEVICE=/dev/printers/0
#PRINTER_0_TYPE=P

#PRINTER_1_NAME="serial"
#PRINTER_1_DEVICE=/dev/ttyS1
#PRINTER_1_TYPE=S
#PRINTER_1_OPTIONS="speed 38400 -imaxbel"

#PRINTER_2_NAME="usb"
#PRINTER_2_DEVICE=/dev/usb/lp0
#PRINTER_2_TYPE=U


#ICA Autocreate Printer Example

#PRINTER_0_NAME="HP LaserJet Series II"
#PRINTER_0_DEVICE=/dev/printers/0
#PRINTER_0_TYPE=P