UniFi, VLANs, Switches to all go together
I was wondering if I could get a sanity check for my design for a UniFi, Netgear with VLAN ACLs and Lightspeed content filtering setup.
Pulling numerous threads of mine together, and with a lot of good help, I'm getting there. If you have a look at the diagram
VLANS IP Range and ACLs
Does this look ok?
The IP range was chosen for the amount of students we have (1100) and staff (200) to give a bit of headroom for the future
One thing I'm puzzled with is do I assign the UniFi APs the IP addresses in the 10.18.96.xxx range, same as the defualt wired network?
and also how does this tie together if I have my DC + DHCP server (Windows 2008 r2 box ) to handle the different scopes, eg do I set scopes up in DHCP and add the helper address (IP address for the Win2008 r2 DC+DHCP server) somewhere in the Core switch settings?
So the goal is for the Netgear Core to do the routing and ACLs..and pass traffic onto the Lightspeed Unit then internet via the Sonicwall(this would replace the Content Filtering running on the Sonicwall I would hope.)
Many thanks as always.