Routing between VLANs on HP ProCurve 4108GL Switch
I'm attempting to setup routing between VLANs on our core switch, a HP ProCurve 4108GL Switch.
So far I've setup some VLANs via the GUI and Named them as well as assigning them a VLAN ID. Additionally I've also enabled IP Routing on the switch as well.
I was hoping it would have been as simple as that but it isn't.
I've tried to create static routes via the CLI, however, it always alerts me that the switch ip can not be a router address at the same time. Upon reading this it looks like I need to point the destination address as our gateway (an ISA Server). I want to avoid this for internal routing if, for whatever reason, this server goes down.
The new range is 172.16.*.* with a subnet mask of 255.255.248.0
At present our current IP system is 192.168.0.0 to 192.168.7.255, also with a subnet mask of 255.255.248.0. This is currently on the default VLAN. I'm hoping I can setup the neccessary routing so I can transfer the servers, infrastructure IPs, clients, printers etc in stages rather than all at once.
Anyone able to offer any help?