VLANS L3 Switch Netgear Help
I have the following switches:
GSM7312 (this is a netgear, L3 Switch with 12 Fibre or Copper Ports)
GS724T (This is a 24 Port L2 Netgear Switch)
VLAN 2 (Servers) VLAN IP 10.11.0.254/16
VLAN 3 (CompRoom1) VLAN IP 10.50.0.254/16
VLAN 4 (PhonesVOIP) VLAN IP 10.60.0.254/16
The GSM7312 allows routing between VLANS, hence each VLAN has IP assigned.
The GSM7312 supports 24 routed VLAN Ports with IP's
I can not access VLANS on the L2 switch, apart from VLAN 4, (this was configured last)
It seems the last VLAN I add is the only one that works, i think this is because the L3 switch Port 7 VLAN ID is set to the last setup one. In this instance VLAN 4.
How can one port support multiple VLANS? I thought Tagging did this???
thanks in advance
I have configured the following
GSM7312 L3 switch
has above VLANS setup with IPs
Port 7 is tagged in all VLANS
Port 7 is linked via fibre to Port 24 on below switch
GS724T (L2 netgear 24 port switch
IEEE 802.1x enabled
VLANS setup on switch as per L3 switch
Ports 1-4untagged +24tagged VLAN 2
Ports 5-8untagged +24tagged VLAN 3
Ports 9-12untagged +24tagged VLAN 4