Printable View
Has anybody got a NETGEAR's ProSafe™ Dual Band Light Wireless Access Point (WAGL102) working from a Aruba Networks controller?
Is it possible because they are a quarter of the price of a Aruba Networks Dual Band Access Point (65AP) and look like they will do the same job.
I just don’t want to waste money on one to find out that it will only work with the Netgear version of the Aruba controller.
Anybody got both bits of kit so they could test it for me?
bump !!!!!!
Has anyone got any idea?
someone must have both bits of equipment out there somewhere!
:(
Nobody? :confused:
I dont use it here, but I would be very surprised if it did work together! Both systems are proprietary, so interoperability of access points will be unlikely.
Guessing not.
Netgear ... YUCK.
IMO I would just get cheap AP that support 802.11x and POE then use MS built in stuff and RADIUS it.
I think this is echoed by the fact no-one uses the Aruba controller but you can find enough topic here about RADIUS.
Some time ago I'm sure that Aruba/Netgear announced that they would work together on some things. The only thing I can find now that vaguely refers to this is here - but it's not quite what's wanted.Quote:
Originally Posted by localzuk
Many of the ProSafe Netgear APs are running Unix (I think it's FreeBSD but don't have one handy to check) so in theory could run whatever code you want
Well not really, as the aruba controller does a *huge* amount more than that. We are looking at buying an aruba wireless system soon for our site.Quote:
Originally Posted by matt40k
I know for a fact that the Netgear controller uses an OEM version of the Aruba 800 controller OS so the protocols are the same.
i know some people that have been testing the Netgear controller and have flashed it with Aruba FW to pre N. there still testing it.. to see how it works..
but there the same box.. just spray it Netgear Blue and stick a bag on it.
Ok people here is the deal.
I have bitten the bullet and forked out £80 for a Netgear AP for testing with my Aruba 800 controller and the short answerer is it’s NOT going to work out of the box with an Aruba controller.
But while doing so I did notice in the Aruba controller licensing section a bit that mentions a “Netgear AP” licence that is DISABLED. So I have contacted Aruba to see if I could purchase one of these licences. But was then told that they no longer sell the Netgear AP licence and they couldn’t give any reason for this but I suspect that it has something to do with the price difference in APs.
This then got me thinking what if you downgrade and load the Netgear OEM Aruba OS onto the 800 controller and then upgrade it to the Aruba OS. Would this process change the “Netgear AP” licence to ENABLED?
There is only one thing that concerns me about trying this and that is the fact that the Netgear OEM Aruba OS has been modified so that nobody has the enable password. So if I downgrade I am worried that I would effectively lock myself out of the controller stopping me from upgrading.
So I now need the help of someone with a WFS709TP to try the standard Aruba password reset procedure and let me know if they can gain access to the enable CLI.
Below is the reset instruction, this info was taken from the Aruba support website. This might not work on the OEM Netgear but it’s worth a try.
Quote:
Product and Software: This article applies to all Aruba controllers and ArubaOS versions.
To restore the admin password on the controller, follow these steps:
Log in from the console.
Use "password" as the user name and use "forgetme!" as the password.
Enable the mode password as "enable".
In configuration mode, enter the ‘mgmt-user admin root’ command to reset the admin password.
Re-login using the new admin password.
In configuration mode, enter the ‘enable secret’ command to reset the enable mode password.
For example:
User: password
Password: forgetme!
(aruba) >enable
Password: enable
(aruba) #configure terminal
Enter Configuration commands, one per line. End with CNTL/Z
(aruba) (config) #mgmt-user admin root
Password: <new admin password>
Re-Type password: <new admin password>
(aruba) (config) #exit
(aruba) #exit
(aruba) >exit
User: admin
Password: <new admin password>
(aruba) >enable
Password: enable
(aruba) #configure terminal
Enter Configuration commands, one per line. End with CNTL/Z
(aruba) (config) #enable secret
Password: <new enable password>
Re-Type password: <new enable password>
(aruba) (config) #write memory
Indeed. We used to use MS Radius and 802.11x. Now with Aruba we still use it, except we dont have to configure every seperate AP in it anymore, it just points to the Aruba box.Quote:
Originally Posted by localzuk
It hugely simplifies deployment and management, thats the main reason for it, if anyone thinks its just a replacement for the built in MS tools they have totally got the wrong end of the stick.
Do you have any contact details, for the people testing the Netgear WFS709TP with Aruba FW? I would really like to get in contact and see how they are getting on. Please send me a private message Cools, if you have any details.Quote:
Originally Posted by Cools
This thread doesn’t seam to be getting any where so I am going to start another one to get the attention of the Netgear WFS709TP users.
http://www.edugeek.net/forums/networ...ler-users.html