Wireless Networks Thread, Weird Ruckus issue in Technical; Recently bought Ruckus, were going around installing, got 14 Points all done so far.(7363's)
Plug in, wait for it to ...
8th February 2012, 02:14 PM #1
Weird Ruckus issue
Recently bought Ruckus, were going around installing, got 14 Points all done so far.(7363's)
Plug in, wait for it to appear in the Ruckus Zone Director with the AP Name RuckusAP , click edit, give it a different name, eg Room 2, set which WLAN group they are in, set the IP to static, save, it reboots and all is good. Last 2 points we have installed its not doing this, they appear in the Zone Director, but they have no name, and they are auto assigning there WLAN group, and i cannot edit the settings, clicking edit does not bring up the big orange/yellow boarded config box.
Other weird thing is in the list of AP's all the correctly configured ones list 5.0Ghz Channels then 2.4 Ghz Channels, these 2 are doing it the other way round. I have tried a factory reset on the AP's but they do exactly the same again.
Whats going on?
8th February 2012, 02:39 PM #2
Whilst the APs are rebooting from a factory reset delete the AP from the ZD.
Once it re-provisions and is connected try again. If something has gone wrong then just a factory reset of the AP will not help. The ZD will keep the settings for that AP's MAC address. Removing it will insure a "fresh" AP join.
8th February 2012, 02:51 PM #3
The delete button is greyed out in the Zone Director when i click the MAC Address of that AP.
8th February 2012, 03:02 PM #4
Can i ask what version the ZD is running?
SSH into the ZD
hit enter at the first username
run the following cmds without quotes
"no ap [MAC address of AP]"
Thanks to StuartWhite from:
Quackers (8th February 2012)
8th February 2012, 06:58 PM #5
Thanks for the help, managed to sort it by rebooting Zone Director once most users had gone home.
Version is 184.108.40.206 build 23
8th February 2012, 07:40 PM #6
Good stuff, fyi 9.3 is out now. Contact your VAR or support guys for the FW
8th February 2012, 08:16 PM #7
Hmmm, interesting to see if it will sort my iPad problem...but to be honest I don't see it being my ruckus setup....
8th February 2012, 08:17 PM #8
What's your iPad problem?
By garethedmondson in forum Windows
Last Post: 14th September 2009, 04:37 PM
By TheElusiveOrangeButton in forum Windows
Last Post: 23rd July 2009, 01:26 PM
By Cruiser in forum Windows Server 2000/2003
Last Post: 22nd April 2009, 08:46 PM
By Quackers in forum Windows
Last Post: 25th April 2008, 10:31 AM
By Richie1972 in forum How do you do....it?
Last Post: 26th July 2007, 02:17 PM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)