+ Post New Thread
Results 1 to 6 of 6
Wireless Networks Thread, Aruba 800 Mobility Controller - Access to Web GUI in Technical; Downloaded much info but can not get to Web GUI of the thing, I'm sure I have right IP and ...
  1. #1

    Join Date
    May 2011
    Location
    Jus North of London, close but not too close
    Posts
    731
    Thank Post
    170
    Thanked 56 Times in 54 Posts
    Rep Power
    35

    Aruba 800 Mobility Controller - Access to Web GUI

    Downloaded much info but can not get to Web GUI of the thing, I'm sure I have right IP and I've tried port 4343. I've never tried before as only been here a small amount of time and have only really just got my head above water enough to have a look around the network.

    Anyone got one of these, I'm told our support company went out of business shortly after installing our unit, maybe that's a sign :-?

  2. #2

    Join Date
    Dec 2009
    Location
    london
    Posts
    102
    Thank Post
    29
    Thanked 6 Times in 6 Posts
    Rep Power
    11
    have you tried https mine is

    https://*.*.*.*:4343/

  3. #3

    Join Date
    May 2011
    Location
    Jus North of London, close but not too close
    Posts
    731
    Thank Post
    170
    Thanked 56 Times in 54 Posts
    Rep Power
    35
    Thanks 10101010,

    Only managed to get into it from an old 2003 server, maybe not happy with newer IE.

  4. #4

    Geoff's Avatar
    Join Date
    Jun 2005
    Location
    Fylde, Lancs, UK.
    Posts
    11,803
    Thank Post
    110
    Thanked 583 Times in 504 Posts
    Blog Entries
    1
    Rep Power
    224
    Try using compatibility mode.

  5. #5

    mattx's Avatar
    Join Date
    Jan 2007
    Posts
    9,240
    Thank Post
    1,058
    Thanked 1,068 Times in 625 Posts
    Rep Power
    740
    David, there are two of those 800's - one I placed in the JB, the other in the Bursars office - the master is the one in the bursar's office and I'm sure there should be a label on it with it's IP address. The other in the JB should also have a label on - if not, they have been removed.
    I also added them [ and all the access points ] into DNS so check in the forward lookup zone for the addresses. I'm sure I added them into the spreadsheet I kept with all the address on too. Also the 800's have two IP addresses each - can't remember why - I think it was configuring the second it had to refer to this address [ like a loop back address ] - Long long time since I set all that up !!
    About time it was taken and out and up-graded isn't it ?
    Also I seem to remember the GUI did not like FF - so stick with IE.
    I also backed up the config somewhere too - can't remember where though....
    Last edited by mattx; 20th October 2011 at 05:23 PM.

  6. Thanks to mattx from:

    Davit2005 (21st October 2011)

  7. #6

    Join Date
    May 2011
    Location
    Jus North of London, close but not too close
    Posts
    731
    Thank Post
    170
    Thanked 56 Times in 54 Posts
    Rep Power
    35
    Cheers,
    Managed to get on from the old BDC in the end, was having a bit of a day with a couple of Chair to Keyboard interfaces yesterday. Still looking for a decent wall


    Don't worry I'll have a look, probably can only be done manually from WEB gui anyway, will prob do that today as bit quieter with out too many interuptions or distractions.

    Cheers

SHARE:
+ Post New Thread

Similar Threads

  1. Controlling access to Work at Home rights software
    By OverWorked in forum Licensing Questions
    Replies: 0
    Last Post: 29th June 2011, 02:50 PM
  2. Replies: 1
    Last Post: 19th April 2010, 03:50 PM
  3. Controlling Access to Exchange ActiveSync
    By si84 in forum Internet Related/Filtering/Firewall
    Replies: 9
    Last Post: 16th February 2010, 09:07 AM
  4. Problem - external access to web server
    By actech in forum Web Development
    Replies: 14
    Last Post: 3rd April 2009, 01:08 PM
  5. External Web Access to IIS 6.0 Server
    By ryan_powell in forum Web Development
    Replies: 24
    Last Post: 9th September 2006, 08:48 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •