Level One GSW-2494 Switch and LACP

[mcnallyfc]

Hi all

I have a new server that i have setup with teaming on the NICs. As well as this i have a new QNAP NAS box that i have setup with the NICs teamed up. Ideally i want both to be able to utilise LACP which im told needs to be setup on the switches as well.

So now I am trying to setup LACP on the ports they are connected to but am having no joy.

Not sure if anyone is familiar with Level one switches but we have a managed stack system and under the settings for the switch the server NICs are plugged into, i can go to Trunk and under Port i have all the ports and ready to configure them for LACP.



When i change the ports (in this case 20 + 21) i simply set the method to LACP, the group i set to a unique ID of 1 for both and then click apply. But this just sticks at this stage with it going nowhere. If i try to browse other settings on that switch it doesnt display anything. Only when i browse to another switch and go back do they reappear but nothing i changed remains and im stuck in a loop.

Any ideas?

[mcnallyfc]

Just an update - solved this by using Telnet to connect to the switch and ran command to set those ports. Worked a treat