How to get a wireless network certificate onto a HP PDA

[woody]

I am trying to get a HP PDA (Pocket PC 2003) to connect to our wireless network which uses A radius server. I have tried to use the HP Enroller, where you have to enter the username and password of a certificate and the address of the server the certificate is set up on. I am doing this but getting nowhere. I don't see how it can retrieve the certificate anyway if it is not connected to the network to begin with.

Has anybody done this before, or is there another way to get the certificate installed?

[plexer]

You can copy the certificate over to the handheld when it's docked with your pc and then use the certificate tool on the handheld to install it.

You may need to convert the certificate from a .cer to what the handheld wants.

Ben

[Geoff]

handheld's usually expect a PEM file.

[plexer]

Some info here:

http://www.jacco2.dds.nl/networking/...ot_certificate
and
http://www.jacco2.dds.nl/networking/p12imprt.html

Ben

[woody]

Thanks plexer,

I used the p12imprt utility from your link and it has worked a treat!!!