Wireless Networks Thread, ISA server fun! in Technical; Anyone help me out here as out LEA guru who used to look after our ISA/Websence server has left and ...
26th January 2009, 10:52 AM #1
ISA server fun!
Anyone help me out here as out LEA guru who used to look after our ISA/Websence server has left and i now have a problem that i am struggling with.
School has purchased an online report writing solution. Staff are getting Network Access errors Code 10061 sometimes when they are trying to write reports in school.
Full error as follows;
Network Access Message: The Page cannot be displayed
Explanation: The Web server refused the connection.
Try the following:
Access from a link
Technical Information (for support personnel)
Error Code 10061: Connection refused
Background: The server you are attempting to access has refused the connection with the gateway. This usually results from trying to connect to a service that is inactive on the server.
Server: our server
Source: Remote server
I have spoken to the people who own the site who claim that the other 100+ schools that use their services don't have a problem.
It looks to me that their is some kind of time out between our ISA server and their reports server.
How/Where can i check on our ISA server what the connection time limit is set to?
Any pointers much appreciated as when i googled it there wasn't much help
IDG Tech News
26th January 2009, 11:09 AM #2
Download Fiddler Fiddler Web Debugger - Freeware HTTP(S) debugging tool
Run Fiddler then using IE re-create the error, Fiddler will output everything that is happending you should then be able to pinpoint the error.
26th January 2009, 11:23 AM #3
Can you go to the loggin in the isa and start a query for that specific remote server. Check if ISA was able to contact the remote server and in what port is being used.
26th January 2009, 12:41 PM #4
How would i do that? Am a total ISA novice
26th January 2009, 02:03 PM #5
Go to the ISA server and find the ISA Server Management. Expand the Server name and click on Monitoring, then select the Logging tab. On the Task Pane on the right, click on Edit Filter. Make sure these three filters are in.
- Log Record Type Equals Firewall or Web Proxy Filter
- Log Time Live
- Destination IP Equals "Remote Server IP address"
Replace Remote Sever IP addres with the real IP address of your remote server. Then click on the Start Query.
Now let the user start the report writing.
27th January 2009, 11:22 AM #6
Just setup the query and it says its fetching results. How long does this usualy take?
27th January 2009, 11:25 AM #7
I would use the Client IP and then replace the IP address of the client PC where the user is running the report from.
Originally Posted by e_g_r
Thanks to spc-rocket from:
artsaudi (27th January 2009)
27th January 2009, 11:34 AM #8
Ashok is right, it should have been the Client IP of the user running the report.
27th January 2009, 11:45 AM #9
Does it work for you?
Is the site secure?
28th January 2009, 10:46 AM #10
The site works and then after a time dosn't. Tried another Proxy server that seems to work and then have the same problem. I just want to find out who's problem it is, ours, theirs or a combination.
Added to this is that home users with customized browsers are having problems as well and the site owners just say get them to use IE7 or Firefox. FFS these are home users who want to browse the way they want to.
28th January 2009, 11:16 AM #11
Could be ISA rewriting the packets to make them comply with standards, I have had that issue before with cisco VPNs. You may need to relax some of hte safety features on the HTTP filter just for that site with an allow rule above your main rule with lapse filtering:
Configuring the ISA Server 2006 HTTP Filter
their server or clientside code could be sending large amounts of stuff back and foward in a suspect way and tripping the filter.
By Diello in forum General Chat
Last Post: 7th May 2008, 01:00 PM
By mrbios in forum Windows
Last Post: 10th July 2007, 01:43 PM
By Norphy in forum Windows
Last Post: 26th May 2006, 02:14 PM
By russdev in forum Windows
Last Post: 9th November 2005, 01:12 PM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)