These ones anygood?
Visio Stencils > Tech Resources Home > Tech Resources from Leviton Network Solutions
I have been documenting our network with MS Office Visio '07 so that we can start adding VLANs during the summer. We have several buildings on site all connected via 1GB and 10GB fibre, then each room connected via copper.
I have documented each major junction over the network but cannot find a 3D setncil for a fibre patch panel (8, 16 & 24 ports). To complete the drawings I have temporarily used a standard UTP patch panel stencil labelled as a fibre one.
I would be very grateful if someone could point me to/or attach a fibre stencil.
Last edited by TriggerHappyUK; 17th July 2008 at 01:58 PM.
I shall have a look tomorrow. I don't have Visio at home.
I've no idea if they are 3d or any good as I don't have vision at all I just found em.
I used the AMP stencils, there's an 8-port fiber patch panel in there and possibly others I've got a 12 port panel in a Visio doc if you can't find the right stencil set, let me know if you want it uploaded...
Last edited by gshaw; 18th July 2008 at 11:29 AM.
@ Plexer Sorry but these don't have the stencil I am looking for.
@ gshaw If you could upload the document that would be great.
Thanks for your help.
Here ya go mate... there's more AMP parts here - just use Google to track down the product numbers
I've attached a 12-port patch panel, hopefully that will do the trick
Did you have any luck finding a 3D fibre patch Visio stencil? I just documented my network too and had no luck finding a 2D stencil to use for mapping out all of the fibre cores to each fibre patch panel so I made my own! Let me know if a 2D one is any use to you.
gshaw: Thanks looks like this will also work for what I need to do.
Glad it was useful
a 2D would be very helpful!
Thanks in advance.
There are currently 1 users browsing this thread. (0 members and 1 guests)