Wireless Networks Thread, AP's in same subnet of users, or in other vlan? in Technical; Hello all. I'll be planning an pilot wifi deployment in my company and I've got a doubt about best practices.
16th November 2013, 12:19 PM #1
- Rep Power
AP's in same subnet of users, or in other vlan?
Hello all. I'll be planning an pilot wifi deployment in my company and I've got a doubt about best practices.
Should I configure AP's in the same subnet of the users or get it in a mgmt vlan?
To configure the AP's in the same subnet (10.1.172.0/22)
10.1.172 .1 - .254 (for AP's)
10.1.173.1- 174.254 (for users)
But I was also thinkig to put the AP's in a different vlan, or a mgmt vlan
10.1.63.1-254 (for AP's)
10.1.172.1- 174.254 (for users)
I'll be deploying a aruba 105 AP's
16th November 2013, 12:47 PM #2
Same subnet, different IP range (beginning or end of scale). That is how I tend to operate.
Thanks to nephilim from:
dinistic (16th November 2013)
16th November 2013, 06:24 PM #3
APs all in an APs vlan - with its own subnet; then ive got separate vlans and subnets for each ssid
16th November 2013, 07:22 PM #4
It all depends on what the AP's are able to do
can thay do 802.11q and vlans
can the switch gear do 802.11q and vlans
do you have a router able to route vlans.
How many clients?
Are the AP's managed or standalone?
17th November 2013, 10:37 AM #5
- Rep Power
The Ap's are maneged with a controller, and the swiches can do vlan's and the router is able to route them.
Originally Posted by twin--turbo
Clients at the beginning about 50, and then could escalate for 500, same building!!
I got an infrastruture mode with a central controller and many ap's in the building
By nikkonine in forum Windows
Last Post: 26th August 2012, 07:43 AM
By Ben_Stanton in forum Scripts
Last Post: 12th September 2008, 09:53 AM
By FN-GM in forum Wiki Announcements
Last Post: 27th March 2008, 12:58 AM
By pickman in forum Windows
Last Post: 23rd February 2007, 01:26 PM
By SpuffMonkey in forum Scripts
Last Post: 8th November 2005, 11:31 PM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Tags for this Thread