ProCurve 2910 basic VLANs
Iím trying to setup some VLANs on our school network to divide the massive broadcast domain that we have and got to the point where donít know exactly what to do to make it work. This is my first attempt to VLANs so feeling like walking on a black forest! Sure you can help me out with this.
Have a HP 2910 and have setup 2 x VLANs with this running configuration:
; J9145A Configuration Editor; Created on release #W.14.38
hostname "ProCurve 2910al-24G Switch"
module 1 type J9145A
ip default-gateway 10.8.160.1
ip address 10.8.163.50 255.255.248.0
no untagged 1-8
ip address 10.10.100.1 255.255.255.0
ip address 10.10.200.1 255.255.255.0
snmp-server community "public" unrestricted
The LGfL router is 10.8.160.1 and all I want to achieve is for vlans 100 and 200 to access the internet and the servers on the default vlan, but donít want the devices on vlans 100 or 200 to be able to communicate to each other.
At present devices on vlan100 and vlan200 cannot talk to each other, which is good, but they cannot talk to LGfL router either!
I would have thought the ip routing command will enable this?
Any help will be great