Static default route question
I have implemented a ProCurve 5406 switch as a main layer 2/3 switch on the network. It has several VLANs configured. Everything works properly except for internet access which only works for VLAN 1. There are 2 ISP routers connected to the switch. What I want is VLAN 1 to be routed through router1 and remainder of VLANs to be routed thought router2.
The connection from 5406 to router1 is untagged for VLAN 1 and router1 has IP of 192.168.60.1.
The connection from 5406 to router2 is tagged for all VLANs with exception VLAN 1 and router2 has IP of 192.168.52.1 for VLAN 52, 192.168.53.1 for VLAN 53, etc.
All internal routing works as devices can ping the 5406 and both routers.
The 5406 has the following IPs:
192.168.60.2 for VLAN 1
192.168.52.2 for VLAN 52
192.168.53.2 for VLAN 53
These are the IPs that are served as default gateways in DHCP
Here's the dilemma. I have a static default route of 0.0.0.0 0.0.0.0 192.168.60.1 on the 5406. Now what the 5406 is doing is routing all traffic to the outside though router1 only. Is there a way to have default routes based on VLANs? Something along the lines of:
0.0.0.0 0.0.0.0 192.168.60.1 for VLAN 1
0.0.0.0 0.0.0.0 192.168.52.1 for VLAN 52
0.0.0.0 0.0.0.0 192.168.53.1 for VLAN 53
Any help would be greatly appreciated.