3com 5500-ei PWR web interface issue

nope.....

Quote:

---

Originally Posted by CyberNerd

you might need to go back into system-config mode

---

system-view (not being pedantic, just help jack_

running out of ideas. could you copy a working config onto the switch?

Quote:

---

Originally Posted by CyberNerd

mine says:


[5500G-EI]display local-user
0 The contents of local user admin:
State: Active ServiceType Mask: TSC
Idle-cut: Disable
Access-limit: Disable Current AccessNum: 1
Bind location: Disable
Vlan ID: Disable
Authorization VLAN: Disable
MAC address: Disable
Password-Aging: Disable
Password-Length: Disable
Password-Composition: Enable 1 type(s), 1 character(s) per type
User Privilege: 3

but it looks like yur admin user has no privileges.

so into system-config mode

Code:

---

sys

---

then do

Code:

---

local-user admin

level 3

quit

save

---

then see if that gives the user the correct rights

---

TSC and level 3 did the trick

cool :cool:

is there a easy way to reset the password @CyberNerd?

in system view

Quote:

---

local-user admin
password simple XXXX
service-type ssh telnet terminal
level 3

---

I've seen 3COM stuff fail to login on the web interface because the time is not set incorrectly on the switch, or on the device you are running the browser on.

@CyberNerd Thanks for that! ive documented the password now!!