Setting up a VLAN for a Guest WiFi profile
We are trying to setup a guest Wireless profile. We want toensure that devices on the guest network can only access the internet. We haveset up a separate VLAN (VLAN 50) for the guest profile. Our guest devices cannow access the internet through VLAN 50. However our core switch (HP 5308xl) isset to route IP traffic to all VLANs. This means that our guest devices can seeother devices on the default VLAN and therefore not achieving what we want.Does anyone know what I need to do on the layer 3 switch. Listed below is partof the config for our core switch. Our Cisco router is plugged into port A1.
snmp-server community "public" Unrestricted
snmp-server host 10.56.84.45 "public"
ip address10.56.84.1 255.255.252.0
ip address10.53.160.30 255.255.252.0
ip address10.58.226.1 255.255.255.0
ip address10.58.227.1 255.255.255.0
ip route 0.0.0.0 0.0.0.0 10.53.160.25