PROCURVE VLAN SETUP - Cannot figure out how to get trunking to work correctly!!
Can anyone please help. We have a test switch setup and we are trying to setup a very simple VLAN using two HP 2650 switches.
We have created a VLAN using just one port (port 1) on each of the switches. These VLANS called "CAMLAN" have a separate address range to the network (192.168.0.1 on switch 1 and 192.168.0.10 on switch 2)
The rest of the ports are as normal part of the DEFAULT_VLAN (ip 10.50.4.20 on switch one and 10.50.4.30 on switch 2)
We want to connect the two switches together so that BOTH vlans use the same single port for traffic. So we setup port "48" on both ports as a "trunked port"
We just cannot get the switches to connect and traffic travel between them, e.g from the network I cannot ping the student PC (ip 10.50.4.100) and from the "Camera PC" (ip 192.168.0.2) we cannot ping the IP camera (192.168.0.100)
Can anyone please suggest what we are doing wrong?