+ Post New Thread
Results 1 to 8 of 8
Wired Networks Thread, hp vlan setup in Technical; im trying to set up vlans on a hp 2510-24 such that all vlans can see port 26 (server) but ...
  1. #1


    Join Date
    Mar 2009
    Location
    Leeds
    Posts
    6,506
    Thank Post
    227
    Thanked 848 Times in 727 Posts
    Rep Power
    287

    hp vlan setup

    im trying to set up vlans on a hp 2510-24 such that all vlans can see port 26 (server) but pcs on odd numbered ports cant see pcs on even numbered ports (test network seemed a nice simple idea lol)

    so from what i can make out i want to tag port 26 on all vlans forbid 1,3... on even 2,4,... on odd and that should be it but atm all pcs can ping all pcs.

    any idea where im going wrong?

    if it makes any odds dhcp is from server on port 26 1 scope

  2. #2


    Join Date
    Jul 2007
    Location
    Rural heck
    Posts
    2,662
    Thank Post
    120
    Thanked 434 Times in 353 Posts
    Rep Power
    126
    What you probably want to do is set all the odd ports untagged for vlan only (don't worry about forbid) and the even ports untagged to vlan 2.

    There's then serveral ways to setup the server, you could tag both vlans to tagged on port 26 and then enable vlan support via the network card properties on the server (if it has it)

    Or if the server has two network port just connect one to a port that's vlan 1 untagged and the other to one that's vlan 2 untagged.

    But first tell us what you're trying to acheive.

    EDIT: And the two vlans should have separate DHCP scopes.
    Last edited by K.C.Leblanc; 14th May 2012 at 04:23 PM.

  3. #3


    Join Date
    Mar 2009
    Location
    Leeds
    Posts
    6,506
    Thank Post
    227
    Thanked 848 Times in 727 Posts
    Rep Power
    287
    im just experimenting not trying to achieve much other than seeing if i can do it. I might at some point vlan off wifi traffic but its mainly to see if i can

    how do i do scopes on diff vlans?

  4. #4


    Join Date
    Mar 2009
    Location
    Leeds
    Posts
    6,506
    Thank Post
    227
    Thanked 848 Times in 727 Posts
    Rep Power
    287
    right on my 3 vlans (ignoring default) i have
    vlan id2 tagged port26
    vlan id3 untagged 1 tagged 26
    vlan id4 untagged 2 tagged 26

    pc plugged into port 1/2 cant ping or be pinged from port 26 can from 3+

  5. #5

    Join Date
    Mar 2010
    Location
    Adelaide
    Posts
    133
    Thank Post
    2
    Thanked 19 Times in 17 Posts
    Rep Power
    12
    Big picture only -
    VLAN 1 - untagged - 1, 3, 5, ... , 23
    VLAN 2 - untagged - 2, 4, 6, ... , 22
    VLAN 3 - untagged - 24 (not sure where you got port 26 on a 24 port switch, but have not looked up this particular model) - for the server

    VLAN 1 - create a deny ACL to VLAN 2 range
    VLAN 2 - create a deny ACL to VLAN 1 range

    Enable IP routing, make sure VLAN 1,2 have ip helper set up for DHCP server.

    Get this working before you worry about tagging ports which overcomplicates things.

  6. Thanks to _Adam_ from:

    sted (15th May 2012)

  7. #6


    Join Date
    Mar 2009
    Location
    Leeds
    Posts
    6,506
    Thank Post
    227
    Thanked 848 Times in 727 Posts
    Rep Power
    287
    ports 25/6 are gb ports so server/uplink most hp 24 ports actually have 26 which is a pain sometimes when you replace 2 with a 48 lol

  8. #7

    teejay's Avatar
    Join Date
    Apr 2008
    Posts
    3,154
    Thank Post
    284
    Thanked 767 Times in 578 Posts
    Rep Power
    334
    Quote Originally Posted by sted View Post
    im trying to set up vlans on a hp 2510-24 such that all vlans can see port 26 (server) but pcs on odd numbered ports cant see pcs on even numbered ports (test network seemed a nice simple idea lol)

    so from what i can make out i want to tag port 26 on all vlans forbid 1,3... on even 2,4,... on odd and that should be it but atm all pcs can ping all pcs.

    any idea where im going wrong?

    if it makes any odds dhcp is from server on port 26 1 scope
    You need to set up access control lists on your switch if you want to actually forbid access to a vlan from different sections of the network.

  9. #8

    Join Date
    May 2012
    Location
    Exeter
    Posts
    5
    Thank Post
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    tagging is the wrong way round you should be tagging ports you want to restrict and untagging ports you dont

    for example

    odd ports are tagged vlan 1
    even ports are tagged vlan 2
    uplink port is untagged.

    on the far end switch you would then do the same, uplinks untagged but the server port tagged in both vlan 1 and 2.

SHARE:
+ Post New Thread

Similar Threads

  1. HP 5406zl VLAN Setup Query
    By Chuckster in forum Wired Networks
    Replies: 10
    Last Post: 6th December 2011, 01:28 PM
  2. 3com simple vlan setup
    By bcx in forum Wireless Networks
    Replies: 6
    Last Post: 18th January 2011, 07:46 PM
  3. student VLAN setup HP procurve 2510/24
    By schoolittech in forum Network and Classroom Management
    Replies: 2
    Last Post: 16th October 2009, 10:02 AM
  4. Multiple VLAN setup on network
    By Rattler in forum Wireless Networks
    Replies: 9
    Last Post: 30th November 2007, 11:08 AM
  5. VLAN setup
    By dezt in forum Wireless Networks
    Replies: 4
    Last Post: 29th November 2006, 08:36 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •