+ Post New Thread
Results 1 to 3 of 3
Wired Networks Thread, VLANS, Inter-VLANS, Smoothwall and hair loss. in Technical; OK So I'm trying to create some VLANs to put the wireless clients on another IP range. Basically wired connections ...
  1. #1
    Gaz
    Gaz is offline

    Join Date
    Feb 2011
    Location
    Preston
    Posts
    829
    Thank Post
    143
    Thanked 72 Times in 63 Posts
    Rep Power
    21

    VLANS, Inter-VLANS, Smoothwall and hair loss.

    OK So I'm trying to create some VLANs to put the wireless clients on another IP range. Basically wired connections on 192.168.10.0/24 and wireless on 192.168.20.0/24

    Server
    IP:192.168.10.1
    GW: 192.168.10.3

    Router
    IP: 192.168.10.3

    Switch - Cisco SG300 Layer 3 mode
    VLAN 10 192.168.10.254
    VLAN 20 192.168.20.254

    Smoothwall
    IP:192.168.10.7
    GW: 192.168.10.3

    I've got two PC's setup on VLAN 20 for testing and they can only get an IP address via DHCP when the server has its default gateway set to 192.168.10.254 The problem with that is the server and VLAN 10 then lose internet connectivity, but VLAN 20 will have internet connectivity.
    I think I've got the static routes setup correctly on the switch (Cisco SG300 Layer 3 mode)
    Attachment 25829
    Smoothwall route
    Attachment 25830

    On the DHCP server (192.168.10.1)
    There are the following scopes
    Workstations 192.168.10.0 - Router option is 192.168.10.7 (Smoothwall)
    vlan 20 192.168.20.0 - Router option is 192.168.10.254 (vlan 20)

    So how do I get internet and DHCP working on both ranges?
    Sorry that its probably not explained very well but If I can elaborate anywhere just ask.
    Thanks.

  2. #2

    Join Date
    May 2011
    Location
    Jus North of London, close but not too close
    Posts
    797
    Thank Post
    180
    Thanked 61 Times in 58 Posts
    Rep Power
    35
    If you get your Cisco switch to do the routing for all vLANS and then set a default route from the switch to your ISP router (0.0.0.0 0.0.0.0 [router ip] )

    Update the DHCP options for the clients to go through the switch as the default gateway for the specific vlan.

    I.E on the switch
    vlAN 30
    ip address 10.0.30.1 255.255.255.0
    ip helper-address (to your DHCP server on each vlan)

    The DHCP scope for the 10.0.30.0/24 range would have the gateway set to the IP address (10.0.30.1) of the vLAN on the switch.

  3. Thanks to Davit2005 from:

    Gaz (22nd July 2014)

  4. #3
    Gaz
    Gaz is offline

    Join Date
    Feb 2011
    Location
    Preston
    Posts
    829
    Thank Post
    143
    Thanked 72 Times in 63 Posts
    Rep Power
    21
    OK so it looks like it was the static route entry that was at fault, I thought it needed to go to the server but upon initial inspection it appears to be working.

SHARE:
+ Post New Thread

Similar Threads

  1. Inter-VLAN woes between HP5308XL and 2610
    By MrJDH in forum Wired Networks
    Replies: 28
    Last Post: 2nd July 2014, 03:03 PM
  2. VLAN assignment via AD and IAS
    By mcrylett in forum Wireless Networks
    Replies: 0
    Last Post: 6th February 2009, 09:47 AM
  3. Exchange hair loss
    By steelrazor in forum Wireless Networks
    Replies: 3
    Last Post: 6th July 2006, 01:36 PM
  4. IP Cop/Smoothwall and Cre
    By webman in forum *nix
    Replies: 12
    Last Post: 12th December 2005, 11:41 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •