Wired Networks Thread, HP V1910-48G Recommed? in Technical; ...
11th February 2014, 02:16 PM #1
- Rep Power
HP V1910-48G Recommed?
Hi Guys and Girls.
We are looking at upgrading our backbone and server room switches from Netgear GS724TS to something with a bit more throughput such as HP 1910-48G showing 104Gbs.
Can anyone recommend this switch or another switch that would suite the bill.
We would like high throughput, 48 x 1GB Copper ports and room for 4 SPF modules. We can get the 1910 for £350 and the modules for £135 so something similar price would be great but we can stretch to £1,000 for the 1 switch and 2 modules if need be.
Thanks in advance for recommendations or suggestions,
11th February 2014, 02:45 PM #2
The 1910-48g is a good cheap edge switch but I am not sure I'd reccomend it as a backbone. I'm guessing this is a primary school? In which case you could probably get away with it, but it is not future proofed for hundreds of devices. Also - they're huge, make sure you have a big cabinet, and they're noisy, make sure it isn't in a classroom.
11th February 2014, 02:48 PM #3
- Rep Power
We are a secondary school with around 500 computers... What would you recommend/What do you use?
11th February 2014, 02:51 PM #4
Get 2920s atleast in your core.
11th February 2014, 03:22 PM #5
If you need to do routing on it, you probably want something beefier.
We have some in our server rack and they haven't missed a beat in three years. 1 for iscsi, one for vmotion and one for the main network with a lacp link to the core.
I wouldn't use one for a core switch except in an emergency.
Still miles better than anything I've tried from netgear though.
11th February 2014, 03:56 PM #6
We used them as an interim core on a basic flat network with 500+ PCs. They were fine (more than fine, great value and quick), but I wouldn't recommend them for that role.
12th February 2014, 10:17 AM #7
- Rep Power
I would recommend seeking advice from a professional network solutions provider. A phone call will cost you nothing.
12th February 2014, 08:45 PM #8
Beware, the V1910 has a ARP table limit of 256 == more than 256 concurrent network devices / IPs will NOT work on the whole switch.
- If you do not need routing: Take a look at HP ProCurve Switch 2530-48G, 52-Port, managed (J9775A) With 4 pieces of 1000BaseSX SFP compatible optics, it will be still under 1000,-€ with VAT.
- If you need routing: Take a look at a "HP renew"ed HP E4800 / HP A5500-EI
Last edited by snoerre; 12th February 2014 at 09:07 PM.
By Nick_Parker in forum Wired Networks
Last Post: 5th December 2014, 12:21 PM
By ConradJones in forum Wired Networks
Last Post: 26th June 2013, 08:33 PM
By Davit2005 in forum Wired Networks
Last Post: 16th September 2012, 10:16 AM
By tj2419 in forum Hardware
Last Post: 8th September 2012, 12:11 PM
By beeswax in forum General Chat
Last Post: 22nd August 2005, 04:37 AM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Tags for this Thread