+ Post New Thread
Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 31
Windows Thread, Winpopup thingy? in Technical; same with me, i followed the instructions but no luck. might just add the staff manually. only planning on testing ...
  1. #16

    Join Date
    Jun 2006
    Location
    Leicester
    Posts
    70
    Thank Post
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Re: Winpopup thingy?

    same with me,
    i followed the instructions but no luck.

    might just add the staff manually.

    only planning on testing it with a few staff before i roll it out to the rest of them.

  2. #17

    Join Date
    Mar 2006
    Location
    Kent
    Posts
    34
    Thank Post
    1
    Thanked 1 Time in 1 Post
    Rep Power
    0

    Re: Winpopup thingy?

    Looks like the Wildfire site has a good and active community that would be worth tapping into. For example, here's a typical thread.

    About to dive into the LDAP/AD thing myself.... gulp - wish me luck, Carruthers... :?

    Ian

  3. #18

    russdev's Avatar
    Join Date
    Jun 2005
    Location
    Leicestershire
    Posts
    6,936
    Thank Post
    709
    Thanked 552 Times in 367 Posts
    Blog Entries
    3
    Rep Power
    204

    Re: Winpopup thingy?

    as garfied once said

    "if not back in hour send an apple pie after me"

    russ

  4. #19

    Join Date
    Mar 2006
    Location
    Kent
    Posts
    34
    Thank Post
    1
    Thanked 1 Time in 1 Post
    Rep Power
    0

    Re: Winpopup thingy?

    I'd rather have a crumble in the jungle, actually!

    (Sorry, missing my lunch - thunderstorm has kept me in...)

  5. #20

    plexer's Avatar
    Join Date
    Dec 2005
    Location
    Norfolk
    Posts
    13,320
    Thank Post
    681
    Thanked 1,651 Times in 1,472 Posts
    Rep Power
    426

    Re: Winpopup thingy?

    hmm rolesoft.com which is supposed to be the homepage of that has died and been taken over by an add by the looks of it.

    Ben

  6. #21
    woody's Avatar
    Join Date
    Jun 2005
    Location
    Carlisle, Cumbria
    Posts
    617
    Thank Post
    3
    Thanked 17 Times in 15 Posts
    Rep Power
    22

    Re: Winpopup thingy?

    Right, OK, with a bit of messing around and with some pointers from the Wildfire forums, I have got LDAP to work.

    The following wildfire.xml works. All you have to do is change it to match your domain and group names. As a pointer, our domain is called 'NCTC' and the group of users it filters to allow access is called 'Staff'.

    Hope this helps:

    Code:
    <?xml version="1.0" encoding="UTF-8"?>
    
    <!--
        This file stores bootstrap properties needed by Wildfire.
        Property names must be in the format: "prop.name.is.blah=value"
        That will be stored as:
            <prop>
                <name>
                    <is>
                        <blah>value</blah>
                    </is>
                </name>
            </prop>
    
        Most properties are stored in the Wildfire database. A
    	property viewer and editor is included in the admin console.
    -->
    
    <jive> 
      <adminConsole> 
          
        <port>9090</port>  
        <securePort>9091</securePort> 
      </adminConsole>  
      <admin> 
        <!-- Use this section to define users that will have admin privileges. Below,
              you will find two ways to specify which users are admins. Admins will
              have access to the admin console (only local users) and may have also access
              to other functionalities like ad-hoc commands. -->  
        <!-- By default, only the user with the username "admin" can login
             to the admin console. Alternatively, you can specify a comma-delimitted
             list usernames that should be authorized to login to the admin console
             by setting the <authorizedUsernames> field below. -->  
        <authorizedUsernames>mwood</authorizedUsernames>  
        <!-- Comma-delimitted list of bare JIDs. The JIDs may belong to local
             or remote users. -->  
         
      </admin>  
      <locale>en</locale>  
      <!-- Network settings. By default, Wildfire will bind to all network interfaces.
          Alternatively, you can specify a specific network interfaces that the server
          will listen on. For example, 127.0.0.1. This setting is generally only useful
           on multi-homed servers. -->  
      <!--
        <network>
            <interface></interface>
        </network>
        -->  
        
      <!-- Note, for Active Directory, try usernameField=sAMAccountName, nameField=displayName,
             emailField=mail -->  
      <ldap> 
        <host>localhost</host>  
        <port>389</port>  
        <usernameField>sAMAccountName</usernameField>  
        <nameField>displayName</nameField>  
        <emailField>mail</emailField>  
        <baseDN>dc=NCTC</baseDN>  
        <adminDN>NCTC\admin</adminDN>  
        <adminPassword>yourpassword</adminPassword>  
        <searchFilter><![CDATA[
        (&
        (objectCategory=Person)
        (memberOf=CN=Staff,OU=Staff,DC=NCTC)
        (sAMAccountName={0})
        )
        ]]></searchFilter>  
        <groupNameField>cn</groupNameField>  
        <groupMemberField>member</groupMemberField>  
        <groupDescriptionField>description</groupDescriptionField>  
        <groupSearchFilter><![CDATA[
        (&
        (objectClass=group)
        (memberOf=CN=Staff,OU=Staff,DC=NCTC)
        (member={0})
        )]]></groupSearchFilter>
        <posixMode>false</posixMode> 
      </ldap>  
      <provider> 
        <user> 
          <className>org.jivesoftware.wildfire.ldap.LdapUserProvider</className> 
        </user>  
        <auth> 
          <className>org.jivesoftware.wildfire.ldap.LdapAuthProvider</className> 
        </auth> 
      </provider>  
        
      <connectionProvider> 
        <className>org.jivesoftware.database.EmbeddedConnectionProvider</className> 
      </connectionProvider>  
      <setup>true</setup> 
    </jive>
    [edit for code tags- please use code tags thanks. tarquel.]

  7. #22

    Join Date
    Mar 2006
    Location
    Kent
    Posts
    34
    Thank Post
    1
    Thanked 1 Time in 1 Post
    Rep Power
    0

    Re: Winpopup thingy?

    Doh - been trying to get Wildfire to use LDAP/AD only to find, much to my surprise, that the server Wildfire is on is not Active Directory enabled! I guess as a web server no one thought that AD would be important there. No wonder I couldn't get it to work.

    Now I have a choice - move Wildfire to an AD enabled server, or enable AD on the existing Wildfire server, or just stick to manual account creation? Think I'll stick to the latter solution and maintain control by hand - it'll probably be easier and quicker, at least for now.

    Anyone noticed that the Spark client application takes a while to start up - like over a minute?

    Ian

  8. #23

    Geoff's Avatar
    Join Date
    Jun 2005
    Location
    Fylde, Lancs, UK.
    Posts
    11,807
    Thank Post
    110
    Thanked 583 Times in 504 Posts
    Blog Entries
    1
    Rep Power
    224

    Re: Winpopup thingy?

    Anyone noticed that the Spark client application takes a while to start up - like over a minute?
    It's written in Java. Blame SUN for their crummy JVM.

  9. #24
    woody's Avatar
    Join Date
    Jun 2005
    Location
    Carlisle, Cumbria
    Posts
    617
    Thank Post
    3
    Thanked 17 Times in 15 Posts
    Rep Power
    22

    Re: Winpopup thingy?

    Quote Originally Posted by Tuxguy
    Anyone noticed that the Spark client application takes a while to start up - like over a minute?
    Mmmmm, Spark loads up pretty quick for me.

  10. #25

    Geoff's Avatar
    Join Date
    Jun 2005
    Location
    Fylde, Lancs, UK.
    Posts
    11,807
    Thank Post
    110
    Thanked 583 Times in 504 Posts
    Blog Entries
    1
    Rep Power
    224

    Re: Winpopup thingy?

    Does for me too, but I'm using Blackdown JVM on Linux so it's obvious why.

  11. #26

    Join Date
    Mar 2006
    Location
    Kent
    Posts
    34
    Thank Post
    1
    Thanked 1 Time in 1 Post
    Rep Power
    0

    Re: Winpopup thingy?

    Found an answer on the Jivesoft website forum - you have to set the Automatic Discovery option to "off" and specify the server to use - all from the Advanced settings button on the Login box. That at least halves the startup time. Still not lightning fast though...

    Ian

  12. #27

    plexer's Avatar
    Join Date
    Dec 2005
    Location
    Norfolk
    Posts
    13,320
    Thank Post
    681
    Thanked 1,651 Times in 1,472 Posts
    Rep Power
    426

    Re: Winpopup thingy?

    @Tuxguy: Just got round to setting this up on my ICT Support server and followed tha AD config instructions from the Jivesoft site and have to say was very pleased when it worked.

    Regarding the server you have it installed on it doesn't matter wether that is a active directory server or not you just set the <host>ip_address</host> to be the ip address of an AD server and then the wildfire server does an ldap lookup against it.

    ben

  13. #28

    russdev's Avatar
    Join Date
    Jun 2005
    Location
    Leicestershire
    Posts
    6,936
    Thank Post
    709
    Thanked 552 Times in 367 Posts
    Blog Entries
    3
    Rep Power
    204

    Re: Winpopup thingy?

    did anyone get this working on a rm network as trying to get it working on ours...

    russ

  14. #29
    woody's Avatar
    Join Date
    Jun 2005
    Location
    Carlisle, Cumbria
    Posts
    617
    Thank Post
    3
    Thanked 17 Times in 15 Posts
    Rep Power
    22

    Re: Winpopup thingy?

    I've got it set up on MS server with AD intergration, but I've never managed an RM network so I don't know what the difference might be in setup. I did post the contents of my 'wildfire.xml' further up so don't know if you can work it out from that?

    (Thanks Tarquel for putting in Code tags. Didn't know I had to do this but I do now!!!)

  15. #30

    russdev's Avatar
    Join Date
    Jun 2005
    Location
    Leicestershire
    Posts
    6,936
    Thank Post
    709
    Thanked 552 Times in 367 Posts
    Blog Entries
    3
    Rep Power
    204

    Re: Winpopup thingy?

    Code:
    <?xml version="1.0" encoding="UTF-8"?>
    
    <!--
    This file stores bootstrap properties needed by Wildfire.
    Property names must be in the format: "prop.name.is.blah=value"
    That will be stored as:
    <prop>
    <name>
    <is>
    <blah>value</blah>
    </is>
    </name>
    </prop>
    
    Most properties are stored in the Wildfire database. A
    property viewer and editor is included in the admin console.
    -->
    
    <jive>
    <log>
    <debug>
    <enabled>true</enabled>
    </debug>
    </log>
    <adminConsole>
    
    <port>9090</port>
    <securePort>9091</securePort>
    </adminConsole>
    <admin>
    <authorizezdJIDs>administrator, SystemAdmin</authorizezdJIDs>
    </admin>
    <locale>en</locale>
    <!-- Network settings. By default, Wildfire will bind to all network interfaces.
    Alternatively, you can specify a specific network interfaces that the server
    will listen on. For example, 127.0.0.1. This setting is generally only useful
    on multi-homed servers. -->
    <!--
    <network>
    <interface></interface>
    </network>
    -->
    
    <!-- Note, for Active Directory, try usernameField=sAMAccountName, nameField=displayName,
    emailField=mail -->
    <ldap>
    <host>localhost</host>
    <port>389</port>
    <usernameField>sAMAccountName</usernameField>
    <nameField>displayName</nameField>
    <emailField>mail</emailField>
    <baseDN>dc=Limehurst,dc=Internal</baseDN>
    <adminDN>Admin@Limehurst.Internal</adminDN>
    <adminPassword>hiddenpassword</adminPassword>
    <posixMode>false</posixMode>
    </ldap>
    <provider>
    <user>
    <className>org.jivesoftware.wildfire.ldap.LdapUserProvider</className> ;
    </user>
    <auth>
    <className>org.jivesoftware.wildfire.ldap.LdapAuthProvider</className> ;
    </auth>
    </provider>
    
    <connectionProvider>
    <className>org.jivesoftware.database.EmbeddedConnectionProvider</classNa me>
    </connectionProvider>
    <setup>true</setup>
    </jive>
    This xml files works on rm network but you have to create a admin2 domain admin user..

    Not got it working with systemadmin and not got it working with staff only user yets...

    Russell

SHARE:
+ Post New Thread
Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. Microsoft Volume Thingy
    By Simcfc73 in forum Windows
    Replies: 1
    Last Post: 3rd August 2007, 09:14 AM
  2. Separate Forum topicy thingy Required!
    By indiegirl in forum Comments and Suggestions
    Replies: 0
    Last Post: 15th March 2006, 09:51 AM
  3. scroller thingy
    By mac_shinobi in forum General Chat
    Replies: 8
    Last Post: 12th October 2005, 08:20 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •