Could not connect printer to LPR Port

[CM786]

Hi guys,

I am trying to setup a D-Link Print Server (DP301U) with an Oki 3200 laser printer.

Everything seems to be fine, but when I try and print a test page I get the message:

Could not connect printer to LPR Port

I set the printer up on another computer and I also kept getting this error, but it suddenly started working.

On the PC I am trying to setup at the moment I have checked that the printer driver settings (port name, IP, Protocol etc are all the same as the PC it works on and I keep getting that LPR port message?

Some Info:

Port Name: PS-B4B8F4
Printer IP: 172.30.***.220
Protocol: LPR (tried Raw and same thing)
LPR Settings - Queue Name: PS-B4B8F4
LPR Byte Counting Enabled

I have tried an old Epson 900 printer using the print server and that works great.

Any ideas?

Thanks

[DMcCoy]

I should think there is a status monitor in the drivers, is there a network version of them without it?

[CM786]

The Dlink Web Interface says the printer is online and connected.

The frustrating thing is that I know this works because I have setup another PC (a laptop) to print to the printer using (what seems) the exact same printer driver settings.

[Tessy]

CM786, i have exactly the same problem. I've done everything i can think of to get this working. Any further ideas much appreciated.

[Heebeejeebee]

I had a similar problen once with HP printers (cheapo laser 1020 range).

Found this that may help in you case though.

It's in Google English but you can get the idea.

HBJB

[Tessy]

hbjb, thanks for the, er, rough translation. Based on what i can make out i think i'll give it another go - I'll let you know how i get on!

[Tessy]

HBJB, your link to the spanish post regarding getting the OKI C3200 to work with the D-Link DP-301U turned out to be exactly what I was looking for. Many thanks for your pointer.