Windows Server 2008 R2 Thread, HP convert to RAID in Technical; I've got Server 2008 R2 running on a single disk HP Dl120 G6 server. Apparently this server has basic RAID ...
9th August 2011, 12:57 PM #1
HP convert to RAID
I've got Server 2008 R2 running on a single disk HP Dl120 G6 server. Apparently this server has basic RAID abilities (i.e 10) which I see can be enabled in the bios.
I added a second drive, enabled RAID in the bios and now the Server 2008 install blue screens on every boot - whether in safe mode or not.
I gather I've got to get the drivers for the RAID on the server somehow, but I'm a bit stuck now. All I want to do is convert the single disk installation to a basic RAID 1 array using the second drive.
Is the only way to do this to flatten the drive and restore the server from a backup?
9th August 2011, 01:03 PM #2
I moved two servers from the B110i RAID controler (which I belive the DL G6s use) to P410 cards over the holidays - one of the servers took the RAID move fine but the other wasn't having any of it at all with problems as you describe above.
In the end it was down to a reinstall of Windows and setup again - it was a virtual host though so it was easy enough to get everything going again.
9th August 2011, 01:35 PM #3
Looks like I'll have to do it from scratch as this one just gets the BSOD all the time!
By brickwall53 in forum Windows Server 2000/2003
Last Post: 22nd January 2011, 04:15 PM
By OutToLunch in forum Windows Server 2000/2003
Last Post: 23rd June 2010, 02:51 PM
By imiddleton25 in forum Web Development
Last Post: 21st January 2009, 12:40 AM
By contink in forum Hardware
Last Post: 31st May 2008, 10:00 PM
By Uraken in forum General Chat
Last Post: 23rd March 2007, 09:47 AM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)