Printable View
We have one particular printer, a Hp LaserJet 1022n that refuses to print until the spooler is restarted on the server. The pupils and staff can connect to the printer and the queue fills up but nothing happens after that.
I've re-created the printer, the port, re-installed the driver, all of which make no difference.
Any ideas?
Cheers
Adam.
We have 40 network printers and this is the only one with the problem. I don't think moving the spooler will make a difference.
Is there an updated driver?
Disable bidirectional support
We have a HP LaserJet 1022nw that wouldn't work until this was done. Although it prints fine when I install it locally on my computer and don't disable Bidirectional Support!
A similar problem happens quite lot with the HP 2600n; that one often crashes the Spooler service completely, taking out all the printers on the server. It's down to the drivers for the rubbish print engine that HP bought in from Zenographics for their cheaper product lines. The irony of course is that HP's own drivers are infamous for bloat and bugs, but these ones surpass even HP's own efforts.
I personally will not touch any HP printer these days. I've just had so many serious problems with them over the years that I simply do not trust them to work right.
Agreed - but it's not just HP - it's always amazed me that printer manufacturers invest thousands in developing a machine that will put a speck of toner on a piece of paper accurately to within a fraction of a millimeter, then release software and drivers so crap they prevent it from being used to it's best advantage:mad:Quote:
Originally Posted by AngryTechnician
Epson seem RELATIVELY good at the moment, but IMHO their software is nowhere near the quality of their hardware.:getmecoat:
We have this problem with a 1018 laserjet, did you manage to resolve it?
HI
I have just had the same problem with a 1022n. I installed it from the the new driver on the hp site and it would not work and in fact crashed the spooler. The only way I could fix it was to install it from the original cd and now it works fine. Dont know why.
Richard
Have you tried another printerdriver, like the one for the HP LaserJet 4.
I use that driver for many printers overhere... it's the first thing I do when i got problems with a printerdriver (HP or other). Most (laser-)printers will work perfectly with this driver.
Unfortunately anything with the Zenographics engine will not take generic drivers. They are host-based printers with no onboard print language interpreter.
Just as an aside, although it's probably unrelated...
I found that a one RIS image I had with various runtimes pre-installed would crash the spooler service because of a bad VB6 runtime... Re-installing the runtime fixed it very quickly.
Just a random thought for anyone with a different but semi-related problem
I have seen this and was able to fix by removing the tick from the bi directional printing!! on the server.
Been a bit slow at replying, unticking bi-directional support fixed it!
Just had experience of this...installed a 1022n and it would crash the print spooler service every 6 minutes.
Unticked the bi-directional support button, and it hasnt crashed so far. result!
The other 'feature' I notice with HP's is that it can create a HP TCP/IP port. Change this to a Standard TCP/IP port and I've found printing to be much more reliable.