Windows Server 2000/2003 Thread, Exchange DNS Errors ID2013 in Technical; Morning all,
I've been battling a funny error that has recently popped up on my exchnage box, and so far ...
16th March 2010, 10:07 AM #1
Exchange DNS Errors ID2013
I've been battling a funny error that has recently popped up on my exchnage box, and so far have drawn up a blank, so fingers crossed some may be able to lift the stone i haven't.
Right the even log shows error 2013 and 2012 "SMTP could not connect to DNS server 22.214.171.124 the protocol used was UPD. It may be down or inacessable"
Now, exchange is working fine, we can send and recieve.
I can't ping the DNS server by IP from any of my machines
However i can do a NSLookup using it
Exchange is set to use these as external DNS serves and from my lasy check RM haven't changed them
So thats it, i'm lost...any ideas?
IDG Tech News
16th March 2010, 02:33 PM #2
- Rep Power
I've always setup our DNS to point to our dns server internally and from there your dns server has forwarders to the outside. In this case, I think you would still have the issue as it doesn't seem like the DNS server that you had is responding. I would try contacting your internet provider to double check what DNS servers they recommend using,
17th March 2010, 01:17 PM #3
Normally i would, but our e-mail is configured a little different. Basically we have a 100meg pipe for general internet vai C&W and our e-mail on a 10meg pipe from RM, so the exchange server needs to look at RM's connection and not the C&W one, if you get what i mean!
17th March 2010, 08:50 PM #4
- Rep Power
I would still call RM then and double check if their DNS server's IP addresses have changed.
Can you ping your DNS servers on your C&W side?
By adameye in forum Windows Server 2000/2003
Last Post: 25th July 2009, 11:14 AM
By rob998 in forum Windows
Last Post: 9th September 2008, 11:45 PM
Last Post: 24th April 2008, 11:43 PM
By d4476m in forum Network and Classroom Management
Last Post: 2nd April 2008, 10:52 AM
By tosca925 in forum Windows
Last Post: 2nd July 2007, 04:27 PM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)