More WDS problems :(
ok so here goes with this one!
I've brought some new PC's and decided to test my HAL XP image on them. So i boot into PXE and start to deploy the image fine! it gets to about 99% and says that there is a problem and the configuration could not be saved.
So, i then try to re deploy the image doing everything exactly the same yet now when I select the same deployment image it wont load WDS and I get the following error
I've changed the HD from AHCI to IDE but still the same..
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Inset your windows installation disc and restart your computer
2. choose your language settings and then click next
3. click repair your computer
Info: The boot selection failed because a required device is inaccessible
It gets half way through loading the WDS settings page and then throws a wobbly
Well i fixed it by turning it off at the wall and turning it on again..