CC4 machine build failing on a Samsung RF711
I'm struggling to get this building onto CC4.
I have added what i thought/think is the Vista 32bit NIC driver to the build area but after starting the PXE boot routine the bugger just goes to a window asking for the offline build key.
When looking at the Diagnostic screen at this point I get two entries in the window:
1) Desc = Realtek PCIe GBE Family Controller MAC Add = abc123 etc IP Add = 0.0.0.0 Conn State = Disconnected
2) Desc = PCI\VEN_14E4&DEV_4727 . . . . . . . Con State = Driver missing
With regards to point 1, the driver for this is installed as far as I can see but it just isn't being picked up!
Any help, suggestions, Ideas etc as always are greatly appreciated.