+ Post New Thread
Results 1 to 6 of 6
O/S Deployment Thread, RIS trouble with Intel DesktopWorkstationServer sata driver - please help!!!! in Technical; Hi all, Ive browsed every forum done every possible fix and I get nothing... Here is what ive done. I ...
  1. #1

    Join Date
    May 2012
    Posts
    3
    Thank Post
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Question RIS trouble with Intel DesktopWorkstationServer sata driver - please help!!!!

    Hi all, Ive browsed every forum done every possible fix and I get nothing... Here is what ive done.

    I have an HP Compaq 8200 elite sff pc that uses Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller.(ive used both intel and hp drivers)

    I created my image with riprep, its running xp sp3.

    my sif (located at i386\Templates\riprep.sif)

    [Unattended]
    OemPreinstall = yes
    OemPnPDriversPath = "\textmode;\\%SERVERNAME%\RemInst\%INSTALLPATH%\te xtmode;\i386"
    FileSystem = LeaveAlone
    ExtendOEMPartition = 0
    TargetPath = \WINDOWS
    OemSkipEula = yes
    InstallFilesPath = "\\%SERVERNAME%\RemInst\%INSTALLPATH%\%MACHINETYPE %"
    LegacyNIC = 1

    [MassStorageDrivers]
    "Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller" = "OEM"
    "IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" = "RETAIL"

    [OEMBootFiles]
    iastor.Sys
    iastor.cat
    iastor.inf
    iaahci.INF
    iaahci.CAT
    Txtsetup.oem


    When I have the Mass Storage Drivers and OEM Bootfiles in the sif i get the txtsetup 21 error. When I remove it from the sif i get the "SETUP DID NOT FIND ANY HARD DISK DRIVES"

    I tried the TXTSETUP.oem as it comes as well as editing in the exact driver under default and disk listed below(can provide FULL if needed):

    [Disks]
    disk1 = "Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller", iaStor.sys, \

    [Defaults]
    scsi = iaAHCI_DesktopWorkstationServer

    ;################################################# ############################
    [scsi]

    ; iaAHCI.inf
    iaAHCI_ESB2 = "Intel(R) ESB2 SATA AHCI Controller"
    iaAHCI_7RDH = "Intel(R) ICH7R/DH SATA AHCI Controller"
    iaAHCI_7MMDH = "Intel(R) ICH7M/MDH SATA AHCI Controller"
    iaAHCI_8RDHDO = "Intel(R) ICH8R/DH/DO SATA AHCI Controller"
    iaAHCI_8MEM = "Intel(R) ICH8M-E/M SATA AHCI Controller"
    iaAHCI_9RDODH = "Intel(R) ICH9R/DO/DH SATA AHCI Controller"
    iaAHCI_9MEM = "Intel(R) ICH9M-E/M SATA AHCI Controller"
    iaAHCI_10DDO = "Intel(R) ICH10D/DO SATA AHCI Controller"
    iaAHCI_10R = "Intel(R) ICH10R SATA AHCI Controller"
    iaAHCI_5 = "Intel(R) 5 Series 4 Port SATA AHCI Controller"
    iaAHCI_5_1 = "Intel(R) 5 Series 6 Port SATA AHCI Controller"
    iaAHCI_5_1_1 = "Intel(R) 5 Series/3400 Series SATA AHCI Controller"
    iaAHCI_DesktopWorkstationServer = "Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller"
    iaAHCI_Mobile = "Intel(R) Mobile Express Chipset SATA AHCI Controller"

    ; iaStor.inf
    iaStor_ESB2 = "Intel(R) ESB2 SATA RAID Controller"
    iaStor_7RDH = "Intel(R) ICH7R/DH SATA RAID Controller"
    iaStor_7MDH = "Intel(R) ICH7MDH SATA RAID Controller"
    iaStor_DesktopWorkstationServer = "Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller"
    iaStor_Mobile = "Intel(R) Mobile Express Chipset SATA RAID Controller"

    ;################################################# ############################



    My folder structure is as follows at the moment:

    i386
    TEXTMODE


    I have tried putting the textmode folder in
    $oem$\textmode
    $oem$\$1\textmode

    NOTHING


    At wits end here, I cannot get this going. Thank you in advance for any help. Please let me know anything I can provide you with.
    Last edited by iamoris; 31st May 2012 at 06:56 PM.

  2. #2

    ZeroHour's Avatar
    Join Date
    Dec 2005
    Location
    Edinburgh, Scotland
    Posts
    5,640
    Thank Post
    894
    Thanked 1,314 Times in 798 Posts
    Blog Entries
    1
    Rep Power
    441
    It has been a while since I have worked with RIS but have you removed the PNF files and restarted the service as per:
    How to add Nic drivers to RIS Images

    That is more specific to NIC drivers though but I wonder if the same issue is happening.
    I presume windows xp installs manually when you use a disk and hit the relevant button to load those drivers your slipstreaming?

  3. #3

    Join Date
    May 2012
    Posts
    3
    Thank Post
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Thanks for your reply ZeroHour! I do not have any files in my i386, just 2 folder "Mirror & Templates"


    When i install xp sp3 from cd and hit the f6 key and add these drivers the installation does work.

  4. #4

    ZeroHour's Avatar
    Join Date
    Dec 2005
    Location
    Edinburgh, Scotland
    Posts
    5,640
    Thank Post
    894
    Thanked 1,314 Times in 798 Posts
    Blog Entries
    1
    Rep Power
    441
    Which OS is the server running 2003 or 2000?
    I am trying to remember the joys of RIS

  5. #5

    Join Date
    May 2012
    Posts
    3
    Thank Post
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    2003 R2 sp2, frustrating thing is we have a ris image for an 8100 (which uses different ahci drivers and works fine)

    would I have to include the ahci drivers during the riprep process?

  6. #6

    ZeroHour's Avatar
    Join Date
    Dec 2005
    Location
    Edinburgh, Scotland
    Posts
    5,640
    Thank Post
    894
    Thanked 1,314 Times in 798 Posts
    Blog Entries
    1
    Rep Power
    441
    Well I don't think its getting that far tbh.
    One thing that would possibly get you building for now would be to config the bios for legacy sata/no ahci mode.

SHARE:
+ Post New Thread

Similar Threads

  1. Mboard with no Wake-On-LAN, please help!
    By farquea in forum Windows
    Replies: 37
    Last Post: 28th November 2012, 02:32 PM
  2. Replies: 1
    Last Post: 25th October 2010, 10:05 AM
  3. SATA drivers needed HELP!
    By Shrimpersfan in forum Windows
    Replies: 7
    Last Post: 7th April 2008, 07:32 PM
  4. Replies: 8
    Last Post: 7th September 2007, 08:26 PM
  5. Replies: 5
    Last Post: 2nd March 2007, 03:13 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •