[WDS] More WDS problems :(

[jamin100]

ok so here goes with this one!

I've brought some new PC's and decided to test my HAL XP image on them. So i boot into PXE and start to deploy the image fine! it gets to about 99% and says that there is a problem and the configuration could not be saved.

So, i then try to re deploy the image doing everything exactly the same yet now when I select the same deployment image it wont load WDS and I get the following error

Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1. Inset your windows installation disc and restart your computer
2. choose your language settings and then click next
3. click repair your computer

Status: 0xc000000f

Info: The boot selection failed because a required device is inaccessible

I've changed the HD from AHCI to IDE but still the same..

It gets half way through loading the WDS settings page and then throws a wobbly

any ideas?

[jamin100]

Well i fixed it by turning it off at the wall and turning it on again..
lol.....