O/S Deployment Thread, Kernel panic on 1 machine in Technical; Imaged a classroom of PCs using FOG today, all went well except I had to reimage some as they didn't ...
27th July 2010, 12:37 PM #1
Kernel panic on 1 machine
Imaged a classroom of PCs using FOG today, all went well except I had to reimage some as they didn't fully image for some reason (Either I overloaded the server or the caretakers knocked the power off!).
Anyway all up and running except ironically PC number 13 which fails to image! Gets to around 42% then kernel panic lots of garbage on the screen. Tried to wipe the disk but still the same, tried to run it without anything plugged in apart from power monitor and ethernet cable no joy. Also tried CMOS reset again no joy.
Now running a memory test on it but if that passes what else could it be? I should stress this PC is from the exact same batch as the rest in the room an Intel DG33BU Stone!
IDG Tech News
4th August 2010, 12:18 PM #2
- Rep Power
Did the memory test pass?
If it did, it might be worth running a quick hard drive test, or reading the SMART information off the drive to check its health quickly - HDAT2 Download
By HilcrRWise in forum O/S Deployment
Last Post: 4th August 2010, 06:46 PM
Last Post: 18th May 2010, 07:03 PM
Last Post: 9th November 2009, 02:47 PM
Last Post: 13th October 2009, 03:21 PM
By ndavies in forum Educational Software
Last Post: 19th May 2008, 03:20 PM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)