O/S Deployment Thread, Windows is loading files... in Technical; Have you tried injecting the correct drivers (chipset, nic, storage) into the boot wim using dism .exe?...
9th February 2011, 01:13 PM #16
Have you tried injecting the correct drivers (chipset, nic, storage) into the boot wim using dism.exe?
4th December 2012, 03:13 PM #17
- Rep Power
I realise this is a long time after the last posts.... but it may help others later......
I have had this problem on a Stone laptop as well, but after some trial and error changes to the BIOS (Phoenix SecureCore) I found that under Advanced --- there is an option for Installed O/S, here I chose Vista / Win 7, but made sure I then changed the SATA Mode Selection to AHCI from IDE.
I have now progressed to a Windows setup screen, wich is a heck of a lot further than I have got before. (TIP: If installing a XP image remember to switch SATA Mode Selection to back to IDE from AHCI or you will get a BSOD.
Last edited by MichaelH; 4th December 2012 at 03:20 PM.
4th December 2012, 04:44 PM #18
How to Modify the BCD Store Using Bcdedit
Scroll down to find the commands for configuring TFTP window and block size, I've found modifying these to certain values helped me get around issues PXE booting various SIS based boards and some other random ones. Also....and this is going to sound crazy, but i have one particular brand of PC here that can't be imaged unless i completely disable audio in the bios, no word of a lie, i went through every bios setting enabling and disabling until it worked, and on every one of that model disabling the audio worked. Computers eh?
Thanks to mrbios from:
ACouch (10th February 2014)
4th December 2012, 04:53 PM #19
I just turned up here to post this.
That is all.
/is clearly just waiting till 4pm at this point
5th December 2012, 10:04 PM #20
I had this problem on some Samsung laptops. The problem was dodgy PXE boot firmware and a BIOS update from Samsung fixed it.
10th February 2014, 12:28 PM #21
- Rep Power
I know this is a very old thread but I just wanted to thank mrbios. After spending many frustrating hours working on this issue I finally tried disabling the audio in the bios and unbelieveably this did the trick.
10th February 2014, 12:34 PM #22
Click the green Thank Post button
By AIT in forum Windows 7
Last Post: 13th January 2014, 11:41 AM
By teckedd in forum Windows 7
Last Post: 8th December 2009, 01:07 PM
By Jobos in forum Windows
Last Post: 11th February 2008, 11:23 AM
By L.E.K in forum Hardware
Last Post: 30th December 2007, 01:43 PM
Last Post: 27th September 2005, 05:23 PM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)