O/S Deployment Thread, [SCCM 2012] Deploying Windows 7 UEFI Toshiba C50 in Technical; Hi,
I'm trying to deploy Windows 7 X64 with UEFI using SCCM 2012 R2 PXE but keep getting the error ...
27th August 2014, 08:35 PM #1
[SCCM 2012] Deploying Windows 7 UEFI Toshiba C50
I'm trying to deploy Windows 7 X64 with UEFI using SCCM 2012 R2 PXE but keep getting the error shown in the attached screenshot when the laptop re-boots... I have seen methods using a memory stick but I'd rather not go that route for now.
I'm using a 64bit Win PE 5.0X boot image and I can deploy Windows 8.1 just fine but the laptop is a troublesome Toshiba C50.
Anyone managed to deploy Windows 7 X64 UEFI using SCCM 2012 R2 PXE?
27th August 2014, 08:57 PM #2
Is SecureBoot enabled? If so, you won't be able to get W7 on there. You need to either kill SecureBoot or see if there's a 'legacy' bios mode
27th August 2014, 08:58 PM #3
Secure boot is disabled and legacy (CSM) just won't see the boot images (32 or 64 bit) which I think is down to the dodgy Toshiba C50 model as linked to in first post.
Last edited by jaminben; 27th August 2014 at 08:59 PM.
27th August 2014, 11:39 PM #4
At what point do you get that error? Is it during the PXE boot?
What OS is your SCCM distribution point server on?
28th August 2014, 09:49 AM #5
That looks to me that the OS Image is getting deployed but is erroring when it tries to boot. I've seen that on machines with SecureBoot enabled which is why I mentioned it.
A USB stick may be your quickest route here.
28th August 2014, 10:27 AM #6
- Rep Power
Do you have UEFI partition step in your task sequence?
We managed to get it working with the following step:
Thanks for your help with the driver selection methods, we've got that working a treat now
Thanks to DannyG555 from:
jaminben (28th August 2014)
28th August 2014, 10:48 AM #7
Yea, it goes through the whole process then fails on the boot... I'll have to try using a USB but I don't hold out too much hope as its a dodgy Toshiba C50 so we may just have to start deploying Windows 8 sooner rather than later.
Originally Posted by Norphy
Yep, we have that step... glad you got the drivers working
Originally Posted by DannyG555
28th August 2014, 11:29 AM #8
At least if you stick it in BIOS mode then boot it from a USB stick, it should build and boot as you don't have to pick up a boot image from PXE.
Originally Posted by jaminben
Thanks to Norphy from:
jaminben (28th August 2014)
28th August 2014, 11:34 AM #9
After it reboots... it installs everything ok or appears to. I'm running Server 2012 R2 with Config Manager 2012 R2 and using a 64bit Win PE 5.0X boot image.
Originally Posted by FN-GM
By denon101 in forum Enterprise Software
Last Post: 4th June 2014, 03:42 AM
By gully1419 in forum Enterprise Software
Last Post: 13th March 2014, 01:58 PM
By bonedog73 in forum Enterprise Software
Last Post: 30th September 2013, 05:06 PM
By Mr.Ben in forum Enterprise Software
Last Post: 30th April 2012, 10:01 PM
By Ric_ in forum O/S Deployment
Last Post: 23rd March 2010, 03:18 PM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)