+ Post New Thread
Results 1 to 1 of 1
O/S Deployment Thread, PXE boot woes under FOG 1.0.1 in Technical; Good afternoon folks, I've trying to setup a fog 1.0.1 server on our network, but seem to be having a ...
  1. #1

    Join Date
    Oct 2013
    Posts
    25
    Thank Post
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    PXE boot woes under FOG 1.0.1

    Good afternoon folks,

    I've trying to setup a fog 1.0.1 server on our network, but seem to be having a few problems with the PXE boot (specifically around DHCP options).

    If I boot using the DHCP server build into the FOG box, everything works correctly, however if I try to use our company DHCP server, coupled with the DNSMASQ proxy, I can't seem to get anywhere - it comes up with cannot start download: operation not supported

    I've attached my DHCPd config file which works, and my LTSP.conf file for DNSMASQ which doesn't work. Can anyone please point me in the right direction whilst I've still got hair left to pull out.

    DHCP config
    Code:
    # DHCP Server Configuration file.
    # see /usr/share/doc/dhcp*/dhcpd.conf.sample
    # This file was created by FOG
    use-host-decl-names on;
    ddns-update-style interim;
    ignore client-updates;
    next-server 10.0.0.15;

    subnet 10.0.0.0 netmask 255.255.255.0 {
    option subnet-mask 255.255.255.0;
    range dynamic-bootp 10.0.0.10 10.0.0.254;
    default-lease-time 21600;
    max-lease-time 43200;
    option domain-name-servers 127.0.0.1;
    option routers 10.0.0.1;
    filename "undionly.kpxe";
    }

    LTSP DNSMASQ config
    Code:
    # Don't function as a DNS server:
    port=0
    # Log lots of extra information about DHCP transactions.
    log-dhcp

    # Set the root directory for files available via FTP.
    tftp-root=/tftpboot

    # The boot filename, Server name, Server Ip Address
    #dhcp-boot=undionly.kpxe,,10.0.0.15
    dhcp-boot=undionly.kpxe

    # Disable re-use of the DHCP servername and filename fields as extra
    # option space. That's to avoid confusing some old or broken DHCP clients.
    dhcp-no-override

    # PXE menu. The first part is the text displayed to the user. The second is the timeout, in seconds.
    pxe-prompt="Press F8 for boot menu", 3

    # The known types are x86PC, PC98, IA64_EFI, Alpha, Arc_x86,
    # Intel_Lean_Client, IA32_EFI, BC_EFI, Xscale_EFI and X86-64_EFI
    # This option is first and will be the default if there is no input from the user.
    pxe-service=X86PC, "Boot from network", undionly

    # This range(s) is for the public interface, where dnsmasq functions
    # as a proxy DHCP server providing boot information but no IP leases.
    # Any ip in the subnet will do, so you may just put your server NIC ip here.
    # Since dnsmasq is not providing true DHCP services, you do not want it
    # handing out IP addresses. Just put your servers IP address for the interface
    # that is connected to the network on which the FOG clients exist.
    # If this setting is incorrect, the dnsmasq may not start, rendering
    # your proxyDHCP ineffective.
    dhcp-range=10.0.0.1,proxy

    Thanks in advance everyone!
    Last edited by neonetman; 16th May 2014 at 12:41 PM.

SHARE:
+ Post New Thread

Similar Threads

  1. SCCM 2012 - PXE Boot woes
    By stebo730 in forum O/S Deployment
    Replies: 4
    Last Post: 8th February 2013, 11:09 AM
  2. [Fog] FOG PXE Boot Problem
    By MrC921 in forum O/S Deployment
    Replies: 4
    Last Post: 20th March 2012, 10:12 PM
  3. [Fog] PXE Boot Menu Password Causes Failure to connect to DB
    By mpmackenna in forum O/S Deployment
    Replies: 1
    Last Post: 14th January 2010, 01:12 AM
  4. [Fog] Anybody managed to PXE boot from a cardbus NIC?
    By Batman in forum O/S Deployment
    Replies: 3
    Last Post: 22nd September 2009, 02:26 PM
  5. [Fog] RM NBook200 wont load pxe boot menu
    By Optics in forum O/S Deployment
    Replies: 2
    Last Post: 23rd July 2009, 01:51 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •