O/S Deployment Thread, Lenovo X1 Carbon Ethernet dongle.. in Technical; Im having some issues imaging this computer... It's a lenovo x1 carbon and we got the USB 2.0 to ethernet ...
15th January 2013, 06:03 PM #1
- Rep Power
Lenovo X1 Carbon Ethernet dongle..
Im having some issues imaging this computer... It's a lenovo x1 carbon and we got the USB 2.0 to ethernet adapter from lenovo. I am able to boot into the MDT2010 and click on launch deployment wizard, but it then says no networking devices were found on this machine. It's weird cause i used the adaptor to PXE boot into mdt 2010... any ideas?
IDG Tech News
15th January 2013, 08:06 PM #2
- Rep Power
maybe i need to add the driver to the lite touch image and not just mdt?
15th January 2013, 09:53 PM #3
I would do that - 9 times out of 10 its drivers.
Originally Posted by agarabaghi
15th January 2013, 11:08 PM #4
In addition to what Glennda said, is 'USB 3.0 Mode' set to Auto in the UEFI BIOS (assuming you are connecting it to the USB 3.0 port that is)?
Last edited by Arthur; 15th January 2013 at 11:09 PM.
By _Bat_ in forum Hardware
Last Post: 4th May 2007, 07:54 PM
By AshF in forum Hardware
Last Post: 27th April 2007, 09:18 PM
By sqdge in forum Wireless Networks
Last Post: 5th April 2007, 05:09 PM
By CyberNerd in forum IT News
Last Post: 28th September 2006, 10:52 PM
By u8dmtm in forum Wireless Networks
Last Post: 7th May 2006, 04:19 PM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)