O/S Deployment Thread, FOG implementation / storage node questions in Technical; Hi fellow IT Folks,
First off, I just want to say that FOG is the best piece of software I ...
18th September 2012, 12:30 AM #1
- Rep Power
FOG implementation / storage node questions
Hi fellow IT Folks,
First off, I just want to say that FOG is the best piece of software I have ever had the privilege of using, bar none. I like its flexibility, I like what it can do, and I like what I can do with it. I used to use DRBL back in the day, and once I got the feel for using FOG, FOG became the replacement, and I havenít looked back since. So I want to give a wholehearted thanks to everyone who works endlessly to keep this project alive. FOG simply is awesome!
I have a question that I am hoping someone can help me with. I work in a community college as a computer lab manager. Part of the way I have implemented FOG is to have a master FOG server on a cart with 2 to 3 other FOG servers serving as storage nodes. I then take this cart, plug all FOG computers into a gigabit switch, and then connect all of the clients that I want to image to the switch as well. At the most, there are 16 clients; at the least, there are 10. Taking the scenario where I image 16 computers at a time, I access the FOG web console and configure the storage nodes in the following manner:
Master FOG server, 4 max clients assigned to this storage node.
Storage Node 1, 4 max clients assigned to this storage node.
Storage Node 2, 4 max clients assigned to this storage node.
Storage Node 3, 4 max clients assigned to this storage node.
This way, the imaging load is evenly distributed across the 4 nodes. (Or so I think.)
When I image, I create a group in FOG that I put the hosts in, configure the image and OS associations and do a unicast restore on the group because if I try multicasting, it chokes the switch. Overall it takes about 30 Ė 45 minutes to push the image out to all 16 clients. The image that I am pushing out is about 40 GB uncompressed.
Since I just took this job in August, I did a quick-assemble on the fog carts with what I had at the time Ė retired Dell Optiplex computers with 2 GB of RAM. I put 300 GB HDDs in all units, and I am only pushing the one image.
I would like to better implement FOG in my next round of imaging while still retaining the carts and isolated server setup. Does it sound like I am on the right track? Do I have the storage nodes assigned properly for even load balancing, or is there a better way to assign hosts to storage nodes?
Iím interested to know, how do you have FOG implemented?
Thank you for your time, and I welcome any and all suggestions.
IDG Tech News
By bart21 in forum O/S Deployment
Last Post: 1st June 2011, 11:50 AM
By cpjitservices in forum O/S Deployment
Last Post: 13th May 2011, 11:42 AM
By clarknova in forum O/S Deployment
Last Post: 29th April 2010, 02:53 PM
By OneWaySWB in forum O/S Deployment
Last Post: 23rd February 2010, 11:20 AM
Last Post: 4th August 2009, 12:41 PM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)