PFSense - What services do I need to run?
I need some techy advise on setting up a wireless hotspot. So far we have a flat network with wireless points all over. I want one access point to be restricted right down. I've seen PFSense mentioned on here a few times. I've got an old box with 2 network cards and installed PFSense to the HDD.
Its got a LAN and WAN card. I've configured a 192.168.1.x/24 range as the LAN for use with the wireless hotspot and also setup DHCP. Im about to connect the WAN NIC to our main network on a 10.12.44.x/22 range.
I don't want it to go t1t's up if I configure it incorrectly.
So here's what I need to know...
1. Do I have to assign a static IP address to the WAN port?
2. What services do I need to be running for clients to be able to connect to the "LAN" 192 range to forward packets onto our school router 10.12.44.1 so they have connectivity?
3. Would I use DNS IP's in the setup and if so would it be the internal DNS servers or the IP's external to us provided by EMBC?
I've managed to get something working at home using VYATTA months ago so my internal VM team could access the internet via my home network following a guide. I assume its very similar?
Thank You AGAIN :)