BYOD with Smoothwall and Ruckus
Ive been trying to get my head around the BYOD, Ruckus and smoothwall setup.
Before i had smoothwall put in i was just testing Ruckus and VLANs which i managed to get working without any problems, now the fun starts when ive added the smoothwall box in.
I have still got the following setup:
Core Switch = 4204vl
Edge switches = various managed hp switches
DHCP = Windows server
So on the main switch i have 4 VLANs where the addresses are been distributed by the windows server. On the switch i have the helper command on each VLAN.
VLAN 1 - Default VLAN (172.16.24.1 - 172.16.31.254)
VLAN 2 - Staff BYOD VLAN (192.168.12.1 - 192.168.15.254)
VLAN 3 - Students BYOD VLAN (192.168.16.1 - 192.168.20.254)
VLAN 4 - Guest VLAN (192.168.24.1 - 192.168.25.254)
I have read that to get things working securely the best thing to do is to setup the smoothwall on say Port 2 (port 1 is for the main network and port 6 is connecting to the router) to give out DHCP addresses. I would most likely be setting the smae values up on the smoothwall box. What would i need to use on the smoothwall box for the IP config of Port 2?
How would this be connected up?
At the moment my ruckus controller is connected in the network from one of the two ports on the controller. Would i need to plug the other port of the ruckus controller into port 2 of the smoothwall box or would i need to plug port 2 of the smoothwall box into the core switch and the 2nd port on the ruckus controller into the core switch and just trunk the 2 ports?
As for setting up the DHCP addresses on the smoothwall, i think i am ok with that (ive only had the box for a week)
I would be most grateful if someone could point me in the write direction.