Printable View
Hello All,
I have APC Smart UPS Smart-UPS RT 10000VA 230V, And Simply it keeps beeping and I dont have much experience in it, So I can tell you what it does, It Makes a discontinuous beeping sound, and flashing, Does anyone knows how to make this annoying beeping sound to stop ?!, Or maybe the cause of this case?
Does it have network monitering or a USB port that you can hook up to at this will give you more information. It is probably unstable voltage like over or undervoltage conditions.
Does it have an ethernet port you can setup to log onto the unit.
If not connect on the serial port and see what it's complaining about.
Battery may need to be replaced..red/orange light showing?
It’s hard to say without knowing the pattern of beeping. Could it be you keep losing power for short amounts of time? Do any of the lights change when beeping happens? Check no power cables have come lose. How old is the unit?
if its not a problem with the mains its normally a battery issue. There should be a simplistic readout on the device look for red or amber lights.
In some Posts, I found that i could connect it to my laptop through a RJ45 to usb cable, I've tried that and the laptop didnt even recognize it !!!, but the Network card in it keeps flashing like its connected and there is no cable plugged in its network card
MYK-IT it is showing a red light on a X sign button
I had this with an APC UPS for a while. It would bleep rapidly for about a minute every hour or so. It had lost connection to the monitoring server. I recommend checking your servers for APC software on your servers.
Pottsey the Light doesn't change, just a red light and the beeping sound, And it has been working for 2 years
It needs to be plugged in to a network with a DHCP server so that it can pick up an IP, you can then use the setup tool which you can find on the APC site to find out the address and configure it. You can also set the IP via a special ARP and ping command combination or use the serial port to configure it.Quote:
Originally Posted by AmrAlmalieh
Maybe take a photo or small video of it and post it here to augment the description, may be easier to get a definative answer. I'd still look at setting up the network monitering though as this will give you more full usage includign server shutdown on power fail rather than just delaying a hard shutdown.Quote:
Originally Posted by AmrAlmalieh
Okay, I've been speaking with London as My server is there, And told them to give me access so i can check, Thanks Dude :)Quote:
Originally Posted by SYNACK
Working on it, I am taking snapshots of it nowQuote:
Originally Posted by SYNACK