iSCSI / SUN 7110 Virtual Simulator problem
I have been busy playing with Sun 7110 Virtual Simulator and have hit what is probably a complete newbie problem.
I have Cifs working fine so I decided to try connecting to it via iSCSI. Please note that as this was just a play, I was using the normal TCP/IP infrastructure which meant that the two devices were not on the same switch.
I have setup the 7110 to take iSCSI on a project and I have setup an initiator. My Initiator was planned to be one of our test Windows Server 2008 servers so I setup iSCSI initiator. This gave me the IQN for the initiator.
The problems come with the next steps. I set up the IP address of the 7110 as a Target Portal - I presume this is ok as if I put in the wrong IP address it tells me there is a connection problem. However, if I try to refresh the Target, it gets nothing.
I am not sure what to do next and how to debug - could anyone give me some starting pointers? I am not using CHAP names or secrets anywhere.
Many thanks for any help anyone can point at.