HP ML110 running W2008
Has anyone got one of these to run Windows 2008, I am struggling :(
I have created the hardware raid with a couple of Sata drives which is fine and dandy. I install the W2008 CD and get to the driver install part where I put in the USB (thank god the floppy has died) and it loads the Raid driver and I can see the drive.
I install but when it reboots I get error loading operating system. Think I had done it before but ended up using software raid instead which I don't fancy doing.
Either the server is not set to boot from the RAID controller, or the server is trying to boot from the USB stick with the raid drivers on!
First make sure the USB mem stick is unplugged.
Of that doesnt work go into the BIOS on the server and make sure the Drive boot order is set to
2 RAID CONTROLLER