Well after many many months of problems with our old netgear switches i'm finally installing a lot of HP Procurve stuff.
Nice shiny 5400zl in the server room with 2650's going out around the college for the fibre links.
All has been going fine until the last 2, always the last ones, switches. With 2 different problems, typical.
One seems to be stuck in a reboot loop, using hyperterminal i get the following
Which just round again and again and again, you get the idea. I've tried using the reset/clear buttons on the front but this doesn't chance anything. Is is buggered?Quote:
Build directory: /sw/rom/build/fishrom(mkfs)
Build date: Oct 11 2007
Build time: 15:49:30
Build version: H.08.05
Build number: 14018
OS identifier found at @ 0x7cb80000
Verifying Image validity ...
CRC on OS image header Passed
CRC on complete OS image file Passed
Valid OS image @ 0x7cb80000
The other is an odd one that i just cannot figure out... i have 1 switch which just wont connect via the fibre module. Have checked the modules they work, checked both ports on the switch, have reset back to factory but still no link. I know the link was fine up until i changed the switches over. Any ideas?