Printable View
Hi
Can anyone recommend a quiet running or reliable fanless switch for use in a small office. Current netgear prosafe 48 port gigabit one is driving the smt member barmy and in turn me!! way too noisy.
Its either a new quiet switch or move the cabinet in summer.
Recommendations from personal experience and not just from manufacturers blurb ideally..
has to be 48 port and gigabit with mini gbic fibre ports.
thanks
gmiller
We've just bought 3 HP ProCurve 1800-24g switches. Silent, gigabit, 2 gbic fibre ports. Only 24 ports but you could buy 2 and glue them together (you can port-aggregate ports, so you could have a 4 Gbps link between them or whatever).Quote:
Originally Posted by gmiller
--
David Hicks
I think your going to have trouble finding a fanless / quiet 48 porter, since most with that many ports are big enterprise level switches.
As above maybe consider 2 x 24s with fibre link or similar. Just make sure they are in a reasonable ventilated cab....
Our LevelOne switches are silent - we use GSW-2472TGX and GSW-2494, can't comment on the 48-port ones, but I don't see why they'd be all that different.
I'd agree that most of the 48port 1u switches that are worth having are going to be noisy. They just have to fit so much more hardware inside the same space and also have faster internal circuitry to deal with the extra ports (I'm talking 1gb stuff here). All of this means they can't get away with passive cooling.
We had this same kind of issue and none of the reasonable gear that we could find was quiet enough so we just ended up moving the cabinet. In the end it seemed like the best bet as even if we found a quieter solution this time we would still be going through all of the hassle again when it came time to upgrade the gear again.
I'm also in the market for a quiet 48-port switch after our passively cooled netgear bricked itself and was looking at a Procurve 2650 - any idea on the noise level?
dabs4work - HP ProCurve Switch 2650 (J4899B)
For values of "quiet", it sits on a shelf 3 metres from my desk in open air and I'd prefer not to hear it at all.
Hi,Quote:
Originally Posted by dhicks
Is this easily setup? I got one 1800-24G and planning on getting another and linking them together. Is it achieved via LACP?
Hi
If any of you want pricing on any Procurve, Netgear or any other brands of switch then get in touch as we can secure an education discount on most networking brands. Netgear for example currently have a 15% education discount running until the end of the month
Many thanks
You can also get cabinets with sound proofing. So even if you have noisy switches, the cabs are quiet. :)
Replacing the cab could be more expensive (depending on the size). I'd say 2 x HP 2510 switches would be a good buy.Quote:
You can also get cabinets with sound proofing. So even if you have noisy switches, the cabs are quiet.
We've got a 2650 setting in our switch cab.Quote:
Originally Posted by pete
The wireless AP controller drowns it out easily.
The 2650 is quiet compared to the big switches, but not by your standards - it still has a fan or two.
About the only switches I know that would work for not being able to hear the 3m away in the open air is the 1800's having no fans.
It is also mostly a 100M switch with a couple of 1G ports to play with for your uplinks...
I've had a quick look on one of the 1800-24G switches we have. LACP and manual trunk are on the controls.Quote:
Originally Posted by mullet_man
It might be worth mentioning that the 1800's don't support STP as far as I know.
Cheers, will it handle VLANs ok then?Quote:
Originally Posted by diggory
Yeah, it does VLANs.Quote:
Originally Posted by mullet_man
You can tag ports etc. I have on running two VLANs with a server sitting between the two in order to have two DHCP servers running on the same subnet (yuck!).
I don't think it does GARP though.
Cheers diggory, just checking we have 2 VLANs setup on first switch fine just wanted to make sure when they are linked it can handle the VLANs ok.