Helppp .....! Can't seem to configure raid on HP Proliant ML370
I am having anightmare tryign to get theis server to boot. The raid config has been messed up and needs to be reconfigured. It has 3 72gb drivers in the server. I have the HP SmartCd but i can't get it to the stage where it boots form the cd. I know its a raid config issue becasue if i unlpug the raid card it will boot to cd no problem but the cd complains there is no boot drive detected.
I have tried to reset the SCSI config but obviously wrong....!
I am at a loss as i have never done ths before. When teh server boots the first option is to configure the 'Lights out option' which i know is nothing to do with the raid, then the next option is the SCSI card config. Now, this i were i am lost as i have no raid experience. Can some one hel me with this. Th eoptions in th econfig are to set the ID, then Rreset the SCSi then enable or disable. The server detects two (or is it dual) SCSI channels and gives you options to configure both.
Hope this makes sense???