Ruckus AP's & POE injectors
I recently switched from using some Netgear wireless stuff to the excellent Ruckus gear. Problem is the poe injectors I was using (axis poe midspan) seem to reboot the aps constantly.I have Netgear switches and the Netgear GS724TSP-200EUS never worked with my vlan settings (I have some other POEs running some Netgear kit instead of using the Netgear switch)
Can anyone recommend me some decent POE injectors... or a decent Netgear switch with POE capabilities.
I have a case logged with Netgear about the POE problem but haven't had the time to follow it up or I might not need them.
Ruckus AP's & POE injecotrs
We use both netgear and ruckus . All of our PoE switches are GS724TP - latest firmware. We did have an issue similar to yours on a previous firmware.
We have 4 vlans (4 SSIDs) on ports 1-10 for our Ruckus APs with 11-20 used for our Mitel VOIP handsets (different VLAN) with 23/24 as a LAG with the 5 VLANs plus our management VLAN.
On average our PoE switches use 5 ports for Ruckus and 7 for our mitel, but it is just easier to standardise all the switches to 1-10 WiFi , 11-20 Phones as we have 12 of these switches.
Also I've got about 10-15 un-used and unopened gigabit PoE injectors if you want a handful to test?