Hardware Thread, Cleaning Sanyo xe40 projectors in Technical; Hi Performed an optical clean on the Sanyo xe40,went okay not as bad as i thought.I now have a striped ...
5th July 2012, 03:07 PM #1
Cleaning Sanyo xe40 projectors
Hi Performed an optical clean on the Sanyo xe40,went okay not as bad as i thought.I now have a striped image on the screen ? what did i do wrong ? anybody got any ideas?? any help apreciated.
5th July 2012, 05:53 PM #2
Sounds like you might have gotten one of the lenses or the metal grids out of a alignment slightly. I had the same issue last holiday when I was cleaning a few and got distracted while putting it back together.
Did you take all the lenses/grids just infront of the bulb housing. If so, check that you got them back in the correct order. With the metal plates with the vertical slits, make sure that the 2 little metal flanges at at the bottom and point towards the bulb.
If you can, you can also pop a lid off another XE40 to check the ordering.
6th July 2012, 12:08 PM #3
Hi Thanks for that,have now checked all you sugested,looks like everything is in place,begining to suspect the vga cable now as i don't have stripes all the time,when the cable is moved i get a pink hue and stripes.Thanks Again.SLiv
10th February 2013, 05:00 PM #4
- Rep Power
hi could you give me details of how to clean the optics----i do not have a service manua----cheers
Originally Posted by sliv
By Gromit in forum Hardware
Last Post: 3rd May 2013, 09:05 PM
By percy in forum AV and Multimedia Related
Last Post: 19th November 2010, 01:51 PM
By avr34 in forum Hardware
Last Post: 28th August 2010, 10:35 AM
By CPLTD in forum Our Advertisers
Last Post: 7th August 2008, 04:45 PM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)