Hardware Thread, The Mysterious Case of the Over Heating Server in Technical; My admin server keeps going into thermal shutdown.
Iíve stripped the server, cleaned the filters, fans and heat sink. I ...
26th March 2010, 03:55 PM #1
The Mysterious Case of the Over Heating Server
My admin server keeps going into thermal shutdown.
Iíve stripped the server, cleaned the filters, fans and heat sink. I have checked the fans are spinning and producing air flow and they speed up when the server gets hot.
Under the heaviest of load it hits 86c and restarts.
I canít for the life of me figure out whatís causing it to reach its upper limit as it all seems to be ok.
Anyone got some ideas?
26th March 2010, 03:58 PM #2
if you have any thermal glue then try removing the proc and cleaning the old glue off and then reseating
26th March 2010, 03:58 PM #3
is the heat sink seated properly on the cpu
26th March 2010, 04:01 PM #4
Dont have any, see below
Originally Posted by Mcshammer_dj
Yes, and its red hot to the touch so I think the efficiency of the thermal paste seems ok.
Originally Posted by JOrdan01070
The airflow over the CPU from the front 2 fans seems good and there is nothing blocking its path.
By Grumbletweezer in forum Virtual Learning Platforms
Last Post: 3rd November 2008, 04:51 PM
By somabc in forum Jokes/Interweb Things
Last Post: 11th July 2008, 01:31 PM
By AnnDroyd in forum Bad Experiences
Last Post: 17th March 2008, 04:36 PM
By contink in forum Hardware
Last Post: 4th October 2007, 05:44 PM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)