+ Post New Thread
Results 1 to 7 of 7
Hardware Thread, HP Laserjet P4015X PCL ERROR - Need Help in Technical; Hello there, First post, so bare with me to get this right! I work at a secondary school and we ...
  1. #1
    Richings110's Avatar
    Join Date
    Mar 2010
    Location
    Berkshire
    Posts
    33
    Thank Post
    2
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Exclamation HP Laserjet P4015X PCL ERROR - Need Help

    Hello there,

    First post, so bare with me to get this right!

    I work at a secondary school and we have a HP Laserjet P4015X printer installed on the network for the Office staff to use. This is used by about 5 people in the office. Now the problem we are recieving is a PCL error. When one of the staff prints more than 2 pages for e.g. 10 page document, it always prints a spare page in between with an error on the top left of the page. Because there are 10 printed, 5 of these pages would come out with the error. This is very frustrating for them and the only thing i can think of solving this problem is to reinstall the drivers on the server again. When you add this printer, it shows PCL6 on the title, i believe this is the type of driver being used?

    The error reads when printed out:

    PCL XL error

    Subsystem: KERNEL

    ERROR: IllegalOperatorSequence

    Operator: EndChar

    Position: 106

    Any help with this to remove it!?

    Thank you.

  2. #2
    Richings110's Avatar
    Join Date
    Mar 2010
    Location
    Berkshire
    Posts
    33
    Thank Post
    2
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Can anyone help me with this problem? Thanks

  3. #3
    jamesreedersmith's Avatar
    Join Date
    Sep 2009
    Location
    Ruskington
    Posts
    1,140
    Thank Post
    77
    Thanked 251 Times in 225 Posts
    Rep Power
    76
    Id put the postscript universal driver on and see how it goes then - youll need to run the setup after installing the universal driver (its automatic normally) and then re install the printer onto the clients using the new driver and see how that goes.

    Linky

  4. Thanks to jamesreedersmith from:

    Richings110 (29th March 2010)

  5. #4
    lionsl2005's Avatar
    Join Date
    Nov 2008
    Location
    Barnet
    Posts
    533
    Thank Post
    373
    Thanked 23 Times in 22 Posts
    Rep Power
    16
    i am getting the error same message

    Subsystem: GEDI

    Error: memA locError

    operator ReadImage

    Position 2853

    any help

  6. #5
    round2it's Avatar
    Join Date
    May 2009
    Location
    UK
    Posts
    989
    Thank Post
    193
    Thanked 142 Times in 100 Posts
    Rep Power
    36
    PS drivers for hp colour lasers seems to fix this issue.

  7. Thanks to round2it from:

    Richings110 (29th April 2010)

  8. #6
    Richings110's Avatar
    Join Date
    Mar 2010
    Location
    Berkshire
    Posts
    33
    Thank Post
    2
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    I'm also getting a member of staff waiting for 5 or 10 minutes while it prints a one page Publisher document which is in black and white, lanscape format. It just stays at the green loading bar near the end and after 5, 10 minutes it completes then it prints. Why does it take so long? The document is only about 500Kb.

    I have installed the Post script driver as stated above and then installed the driver on the machine. Just need to test it 100%, can't do anything around here during school time. It's horrendous.

  9. #7
    Richings110's Avatar
    Join Date
    Mar 2010
    Location
    Berkshire
    Posts
    33
    Thank Post
    2
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Works now, downloaded the PCL 5 driver on network and added the printer again to client machines, thanks for the help.

SHARE:
+ Post New Thread

Similar Threads

  1. Replies: 1
    Last Post: 10th November 2009, 10:37 AM
  2. Replies: 0
    Last Post: 10th October 2008, 12:10 PM
  3. whats the differance between EMF and PCL 5/6
    By timbo343 in forum Windows
    Replies: 11
    Last Post: 10th January 2007, 09:50 AM
  4. HP laserjet 6p
    By chrbb in forum Hardware
    Replies: 2
    Last Post: 9th March 2006, 10:00 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •