Hardware Thread, D-Link DWL-3200AP High Pitch Whine \ Whistle \ Buzz in Technical; I've had this with a dwl2000 ap+ It was part of a wireless bridge that ran 24hrs a day for ...
23rd May 2012, 04:33 PM #16
I've had this with a dwl2000 ap+ It was part of a wireless bridge that ran 24hrs a day for 5 years it started getting really unstable and the caps across the power supply input were obviously expanded, an upgrade of the caps (upped to 25v from 16v, when the PSU was poking out 15v, despite being rated at 12v!) fixed the problem for another 2 years!
IDG Tech News
23rd May 2012, 04:38 PM #17
removed my caps, c907 was 466uf and C908 was 412uf the coil inbetween has a cloudy solder joint so I touched him too. C908 is low but I'm not sure it was low enough to cause failure?
24th May 2012, 05:54 PM #18
- Rep Power
We have thousands of these in the field and I have repaired many. I have a recent write up I did displaying which caps need replaced. Post 15 is correct. My word document also contains a link where you can purchase these for .25 each or less in bulk. I fixed 7 just two days ago and will do another 30+ hopefully tomorrow. Total repair time is 10 to 15 minutes each at a cost of approx .75 per unit. This cost includes two caps, solder and butane.
PM me if you would like a copy of my word file.
Last edited by spdy330; 24th May 2012 at 05:56 PM.
24th December 2012, 03:52 AM #19
- Rep Power
For those who have emailed me for my little write up I have included a link to dropbox where you should be able to get this on your own. If for some reason it does not work just message me and I will get it to you.
If this was successful for you please let me know.
Originally Posted by spdy330
By FN-GM in forum IT News
Last Post: 22nd June 2009, 05:07 PM
By DirtySnipe in forum EduGeek Joomla 1.5 Package
Last Post: 15th June 2008, 09:02 PM
By MK-2 in forum General Chat
Last Post: 11th April 2008, 04:37 PM
By eean in forum Hardware
Last Post: 5th February 2008, 04:31 PM
By ChrisH in forum Hardware
Last Post: 19th July 2006, 10:27 PM
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)